Adcom GTP-760 Power, Input Selectors tape, LD, Volume Up/Down, Tuning Up/Down, Guide, Menu

Page 22

30Source Selectors (main, DVD, VCR, tuner, v. aux, CD, dig.1, dig.2.) These buttons serve two functions.

•First, they switch inputs on the GTP-760 so you can hear the source you’ve just selected.

•Second (and even more important), they can change the functions of all the other buttons on the remote controller. In other words, if you first push the DVD device selector, the remote’s select/play button generates a command code for your DVD player. If you then press the dig.2 device selector, the same select/play button would send a different command code that might, for example, start your mini-disc player. (Of course, this all depends on how you programmed the remote in the first place. Don’t worry-we’ll cover that shortly.)

31Power

•In main mode (after you’ve pressed the main device selector), this is preprogrammed to turn the GTP-760 on and off.

•In tuner mode, it is also preprogrammed to turn the GTP-760 on and off.

•The button is programmable for use with other sources.

32Input Selectors (tape, LD)

•In main mode, these are similar to the source selectors described above but they switch only GTP-760 inputs. They DO NOT automatically change the functions of other remote buttons.

•These buttons are programmable for use with other sources.

33Volume Up/Down

•These are the only buttons preprogrammed at the factory with the same command. In all modes, these buttons change the master volume setting of the GTP-760.

34Tuning Up/Down

•In tuner mode, these buttons are preprogrammed to scan up or down the GTP-760’s AM or FM band.

•They are programmable for use with other sources.

35Guide

•This is intended for easy call-up of cable or satellite program guides.

•Button is programmable for use with any source.

•In CD mode, it is preprogrammed for audible reverse scan with an ADCOM CD player

36Menu

•In main mode, this is preprogrammed to call up the GTP-760’s SETUP menu system. (A subsequent push will exit the menu, regardless of which menu screen you are in.)

•It is programmable for use with any source.

•In CD mode, it is preprogrammed for audible forward scan with an ADCOM CD player

37< (left arrow)

•In main mode, this is preprogrammed to step through the various choices you might wish to select while a menu item is highlighted.

•In CD mode, it is preprogrammed for audible reverse scan with an ADCOM CD player

•The button is programmable for use with any other source.

38Up arrow/Pause

•In main mode, this is preprogrammed to scroll up to the next choice on a menu screen.

•In CD mode, it is preprogrammed to pause an ADCOM CD player.

•In tuner mode, it is preprogrammed to start scanning preset frequencies higher than the current station.

•The button is programmable for use with any other source.

39> (right arrow)

•In main mode, this is preprogrammed to step through the various choices you might wish to select while a menu item is highlighted.

•In CD mode, it is preprogrammed for audible forward scan with an ADCOM CD player

•The button is programmable for use with any other source.

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents GTP-760 Page Safety Notification Explanation of Graphic SymbolsAdcom Protection Plan USA only Concealed Shipping DamageTable of Contents On Screen Display Initial SetupSurround Modes Tuner Room Product Features Front Panel ControlsPage Digital Audio inputs Rear Panel Inputs & Outputs System ConnectionsYellow centers Center Channel and SubwooferComposite or S-Video? DVD Digital Audio/Standard Composite Video Inputs I g g e r o u t 21 12 Volt Trigger Output VCR Inputs and OutputsRoom 2 Outputs Video Aux InputVideo Processor Inputs and Outputs Standard Composite Video Monitor Outputs Tape Inputs and OutputsCD Inputs Video Inputs and Outputs Remote Control Connections Video Processor On/Off SwitchPreamplifier Outputs AC Power Cord Receptacle export models 27 5.1 Channel InputsRemote Control AC Convenience Outlets 115VAC models54 55 Tuning Up/Down PowerVolume Up/Down Input Selectors tape, LDShift Down arrow/StopSelect/Play 44 FM/AMCenter Up Rear UpRear Down Center DownDig.1 Main Tuner All OthersDig.2 Using Preprogrammed Commands Programming Your Adcom GTP-760 Remote ControllerIntroduction Programming Your Own Commands Deleting clearing Individual Programmed Commands Macro CommandsPlacement INSTALLING/CONNECTING the GTP-760Connections Channel Delays What this section is all aboutDIM L DIM C DIM R DIM LS DIM RS Preset 2 Main Large, Center On, Rears On, Subwoofer Off Preset 1 Main Small, Center On, Rears On, Subwoofer OnPreset 3 Main Large, Center On, Rears On, Subwoofer On By Ear Sound MeterInput Settings Operating Mode Selection Basic OperationPage Programming Preset Stations Tuner Selecting stationsRoom 2 Operation Introduction Listening to Preset StationsSetting Room 2 Playback Volume Operating Room 2 From the Front PanelTrouble Shooting Operating Room 2 From RoomPage CARE, MAINTENANCE, and Service Specifications GTP-760 This page has been interntionally left blank Timber Lane Marlboro, NJ Tel 732 Fax 732

GTP-760 specifications

The Adcom GTP-760 is a high-performance audio/video surround processor that combines advanced technology with ease of use, delivering an exceptional home theater experience. At the heart of the GTP-760 is its extensive support for various audio formats, including Dolby Digital, DTS, and MPEG. This enables the processor to provide an immersive audio experience, allowing users to enjoy their favorite movies, music, and games with remarkable clarity.

One of the standout features of the GTP-760 is its multiple input options. It comes equipped with a range of analog and digital inputs, including HDMI, allowing for seamless integration with a variety of audio and video sources. The HDMI inputs support 4K video pass-through and scaling, making the GTP-760 a future-proof option for home theater setups. Additionally, the inclusion of S-Video, composite, and component video connections ensures compatibility with older devices.

The GTP-760 also offers a comprehensive equalization system, allowing users to tailor their audio output to suit their room’s acoustics and personal preferences. The built-in audio DSP (Digital Signal Processor) delivers advanced sound processing capabilities, enhancing the overall listening experience. With customizable sound modes, users can select settings optimized for music, movies, or gaming, ensuring versatility for different content types.

User friendliness is a focal point of the GTP-760 design. The intuitive front panel controls and the ergonomic remote make navigation a breeze, while the backlit display provides clear visibility, even in low light environments. Additionally, the processor features programmable memory settings, allowing users to save different configurations for quick access.

Beyond audio performance, the GTP-760 offers robust video processing capabilities. It supports various video formats, ensuring high-quality picture output regardless of the source. The unit’s solid build quality and premium components contribute to its reliability and longevity.

In conclusion, the Adcom GTP-760 is a well-rounded surround processor that delivers outstanding sound quality and video processing capabilities. Its variety of input options, advanced audio technologies, and user-friendly design make it an excellent choice for both amateur and avid home theater enthusiasts. With its ability to enhance audio-visual experiences, the GTP-760 stands out as a remarkable addition to any entertainment system.
Top Page Image Contents