Adcom GTP-760 owner manual Dim L Dim C Dim R Dim Ls Dim Rs

Page 31

In a typical home theater system, the distance from each speaker to the listening position will be different. The most common example: in many home theaters the center and rear speakers sit closer to the listener than the main speakers. In such a situation the sound emitted from the closer speakers will be heard first. For many movie soundtracks the effect of this may be very mild, perhaps unnotice able. In others, it can be subtly distracting. To compensate for this, the GTP-760 can slightly delay the audio sent to the center and rear (closer) speakers. In this way, when playing Dolby Digital or Dolby Pro Logic soundtracks, the sound from all speakers arrives uniformly at the listening position as intended by the film’s producer[FD1].

L

C

R

DIM L

DIM C

DIM R

 

LS

 

RS

DIM LS

 

DIM RS

To set the center channel delay, use the ( or ( buttons to highlight the CENTER field. Measure the distance from the listening position to the center speaker (DIM C) and to one of the main speakers (DIM L or DIM R). Subtract the center channel distance from the main L or R channel distance. For example, if the main speakers are 15 feet from the listening position and the center speaker is 12 feet, the difference is 3 feet and the center channel delay is set to 3 milliseconds (15-12 = 3). Use the < and

>arrow button on the remote control to change the CENTER delay settings. The GTP-760 can delay the center channel output up to 5 milliseconds and thus compensates for center channel speakers that are up to 5 feet closer to the listening position than the main left and right speakers.

In rare system setups, the center channel speaker is actually farther away than the main left and right speakers. In these cases, set the center channel delay to 0mS.

Similarly, for the rear channels, use the ( or ( buttons to highlight the REAR field. Measure the distance from the listening position to either the left or right surround speaker (DIM LS or DIM RS). Subtract the rear speaker distance from the main speaker distance. The resulting distance is equivalent to the delay in milliseconds for the rear delay setting. For example, if your rear speaker distance is 9 feet and the front distance is 15 feet, the correct rear channel delay setting is 6 milliseconds (15-9=6). Again, set the rear channel delay to 0 if the rear channels are further from the listening position than the fronts. When both delays have been entered, highlight DONE and press select/play to save your settings and return to the SETUP menu.

3.3SPEAKER SIZE

In the SETUP screen, use the You will see:

>

or

>

arrows to highlight SPEAKER SIZE and press select/play.

SPEAKER SIZE

SELECT PRESET: 1

MAIN: SMALL

CENTER: ON

REARS: ON

SUBWOOFER: ON

UNDO CHANGES DONE

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents GTP-760 Page Explanation of Graphic Symbols Safety NotificationConcealed Shipping Damage Adcom Protection Plan USA onlyTable of Contents On Screen Display Initial SetupSurround Modes Tuner Room Front Panel Controls Product FeaturesPage Center Channel and Subwoofer Rear Panel Inputs & Outputs System ConnectionsYellow centers Digital Audio inputsComposite or S-Video? DVD Digital Audio/Standard Composite Video Inputs I g g e r o u t VCR Inputs and Outputs 21 12 Volt Trigger OutputRoom 2 Outputs Video Aux InputVideo Processor Inputs and Outputs Standard Composite Video Monitor Outputs Tape Inputs and OutputsCD Inputs Video Inputs and Outputs Remote Control Connections Video Processor On/Off SwitchPreamplifier Outputs 27 5.1 Channel Inputs AC Power Cord Receptacle export modelsAC Convenience Outlets 115VAC models Remote Control54 55 Input Selectors tape, LD PowerVolume Up/Down Tuning Up/Down44 FM/AM Down arrow/StopSelect/Play ShiftCenter Down Rear UpRear Down Center UpDig.1 Main Tuner All OthersDig.2 Using Preprogrammed Commands Programming Your Adcom GTP-760 Remote ControllerIntroduction Programming Your Own Commands Macro Commands Deleting clearing Individual Programmed CommandsPlacement INSTALLING/CONNECTING the GTP-760Connections What this section is all about Channel DelaysDIM L DIM C DIM R DIM LS DIM RS Preset 2 Main Large, Center On, Rears On, Subwoofer Off Preset 1 Main Small, Center On, Rears On, Subwoofer OnPreset 3 Main Large, Center On, Rears On, Subwoofer On Sound Meter By EarInput Settings Basic Operation Operating Mode SelectionPage Tuner Selecting stations Programming Preset StationsOperating Room 2 From the Front Panel Listening to Preset StationsSetting Room 2 Playback Volume Room 2 Operation IntroductionOperating Room 2 From Room Trouble ShootingPage CARE, MAINTENANCE, and Service Specifications GTP-760 This page has been interntionally left blank Timber Lane Marlboro, NJ Tel 732 Fax 732

GTP-760 specifications

The Adcom GTP-760 is a high-performance audio/video surround processor that combines advanced technology with ease of use, delivering an exceptional home theater experience. At the heart of the GTP-760 is its extensive support for various audio formats, including Dolby Digital, DTS, and MPEG. This enables the processor to provide an immersive audio experience, allowing users to enjoy their favorite movies, music, and games with remarkable clarity.

One of the standout features of the GTP-760 is its multiple input options. It comes equipped with a range of analog and digital inputs, including HDMI, allowing for seamless integration with a variety of audio and video sources. The HDMI inputs support 4K video pass-through and scaling, making the GTP-760 a future-proof option for home theater setups. Additionally, the inclusion of S-Video, composite, and component video connections ensures compatibility with older devices.

The GTP-760 also offers a comprehensive equalization system, allowing users to tailor their audio output to suit their room’s acoustics and personal preferences. The built-in audio DSP (Digital Signal Processor) delivers advanced sound processing capabilities, enhancing the overall listening experience. With customizable sound modes, users can select settings optimized for music, movies, or gaming, ensuring versatility for different content types.

User friendliness is a focal point of the GTP-760 design. The intuitive front panel controls and the ergonomic remote make navigation a breeze, while the backlit display provides clear visibility, even in low light environments. Additionally, the processor features programmable memory settings, allowing users to save different configurations for quick access.

Beyond audio performance, the GTP-760 offers robust video processing capabilities. It supports various video formats, ensuring high-quality picture output regardless of the source. The unit’s solid build quality and premium components contribute to its reliability and longevity.

In conclusion, the Adcom GTP-760 is a well-rounded surround processor that delivers outstanding sound quality and video processing capabilities. Its variety of input options, advanced audio technologies, and user-friendly design make it an excellent choice for both amateur and avid home theater enthusiasts. With its ability to enhance audio-visual experiences, the GTP-760 stands out as a remarkable addition to any entertainment system.
Top Page Image Contents