Millennium Enterprises Stereo150 manual Assigning Functions, Assigning Presets to Footswitches

Johnson Millennium

Section - 6 The J-12 Foot Controller

Assigning Functions

The J -12 helps you organize your sounds into 19 groups called Banks. Each of these Banks utilize the 10 footswitches patches, which are user programmable to do one of several functions. These functions include:

•Selecting any Millennium Preset

•Modifying or turning On/Off any Parameter in real-time

•Sending MIDI CC information out of the MIDI out port (Toggle CC# for values 0 or 127)

•Assign a MIDI CC# for the Expression pedal to send out the MIDI port

To change Banks, Press either the Bank Up or Bank Down footswitches on the J-12 to take you up or down one bank at a time.

The Foot Controller setup menu contains all the setup options necessary to use the Millennium with the optional J-12 foot controller. The submenus included under the Foot Controller setup are located on pages 10, 11 and 12 of the Utility menu and they include:

•Patch Assignment

•Continuous Control

Assigning Presets to Footswitches

To assign any currently selected Preset to a patch footswitch in the currently selected bank, do the following:

1. Once the selected Preset has been chosen, press the <Assign> button once. The display reads:

				Select a Contrl F.Switch
	2							￿￿
				1	2		3	4
				LINK CHANGED	LINK CHANGED		LINK CHANGED	LINK CHANGED
					COMP WAH TUBE EQ	#	GATE
									L/R OUTS
FACTORY	USER	b	SEAMLESS
BANK 1							CLIP		L/R OUTS
							DIGITAL

2.Press one of the ten footswitches to Link the selected preset to that switch. If you choose a footswitch that is already assigned to do something else besides select a preset, the display reads:

			Re-Assign F.Switch ?
	2						￿￿
			1	2			YES		no
						3		4
			LINK CHANGED	LINK CHANGED		LINK CHANGED		LINK CHANGED
				COMP WAH TUBE EQ	#	GATE
										L/R OUTS
FACTORY	USER	SEAMLESS
BANK 1	11 b					CLIP
						DIGITAL

3.Turning the <3> function button re-assigns the function of the footswitch while turning <4> will leave everything as it was, aborting the procedure.

Once you link a Preset to a Patch in a Bank, the LED lights above the footswitch that you selected indicating the Link was successful.

4. Press the <Preset> button to exit.

User Guide

69