Millennium Enterprises Stereo150 manual Other Pedalboard Tidbits, Using the Tuner, Naming Banks

Page 83

Johnson Millennium

Section - 6 The J-12 Foot Controller

Other Pedalboard Tidbits

Here are a few other features that you will want to learn about to get the most out of your J-12 foot controller:

Bank Up/ Tuner and Bank Down / Bypass Footswitches

These two foot switches are located at top right side of the J-12. The Bank Up/Tuner footswitch, as you may have guessed, will move to the next Bank Up in the Millennium, as well as access the Tuner Mode by simply pressing and holding the footswitch until the Tuner appears in the display.

To access the next bank down press the Bank Down footswitch once. To bypass the Digital effects in the Millennium, press and hold the footswitch until the LEDs indicate that the unit is now in effect bypass mode.

Using the Tuner

1.To access the Tuner mode using the optional J-12 foot controller, press and hold the <Bank Up/Tuner> footswitch to engage tuner mode.

2.As you play a note on the guitar, the indicator in the display of the J-12 will move either to the right, or the left. If the indicator is moving right, the note you are playing is sharp. If the indicator moves left, you are flat. The goal is to tune your guitar so that the indicator stops in the middle and the display locks-in, indicating you are in tune.

3.In both methods of tuning, the tuner is referenced to A=440Hz. If you prefer tuning sharp or flat according to the A reference, use the <3> knob to select a new reference. This can be set as high as A=453Hz or as low as A=427Hz. The tuner can also be used for alternate tuning references where A=Ab (meaning you play an A note, but you hear an Ab note). It is possible to tune as low as A=Gb.

4.At this point, press any footswitch on the J-12 to exit the Tuner mode.

Naming Banks

Straight out of the box, the Millennium has 19 user Banks to choose from when used with the either the J-12 foot controller. Each of the Banks have been given a specific named to give indication to what type of presets exist with the Bank. In your constant editing mode to make the box custom to your needs, we have given you the ability to rename the Banks. The procedure is as follows (and please don’t worry, we won’t be hurt):

1.From Preset mode press the <Utility> button and the display will appear something like this:

2.Turn the <Page> knob until you reach page 13 and appears like this:

2

Bank: Top 5

 

 

￿￿ Name?

1

 

2

￿ 1

 

3

 

4

Yes

LINK CHANGED

 

LINK CHANGED

 

LINK CHANGED

 

LINK CHANGED

 

COMP WAH TUBE EQ

#

GATE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L/R OUTS

FACTORY USER

SEAMLESS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PAGE11 OF13 b

 

 

 

 

DIGITAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLIP

 

 

 

 

 

 

L/R OUTS

User Guide

75

Page 82 Page 84
Image 83
Page 82 Page 84
Contents User’s Guide Mains Plug Warning EN 55020 Manufacturer’s NameEN 55013 Quick Start Connect J-3 Multi-Function FootswitchApply Power Adjust Input and Output Select PresetTable of Contents Digital Effects Section Editing Modules Advanced TopicsAmplifier Section Midi FunctionsAppendix Using the Johnson Amplification J-12 Foot ControllerUser Guide Congratulations IntroductionUser Guide Front Panel Quick Tour of the Millennium100 User Guide F FX Library Buttons Midi Rear PanelAmerican Stack Dual Rectifier, Boogie MK II, Soldano SLO Amplifier Model TypesEffects include Programmable Mono FX Loop Basic SpecificationsJohnson Amplification J-12 foot controller Foot Controller CompatibilityModule Sizes Module TypesMaking Connections Setting UpXLR Cabinet Emulation functions To Exit this mode, simply press the Preset buttonAssign Mode Preset ModeFX Edit Mode Utility ModeGetting Sounds Input and Master Output AdjustmentsGain Adjustments EQ and Preset LevelAmplifier Contour Control Wet/Dry Mix Adjustments Global or LocalAmplifier Model and Channel Selection Digital FX Quick Adjust Knobs Press the Utility button once. The display reads Selecting a PresetUsing the Tuner Utility Menu Tuner ModeReference and Output Johnson Amplification J-12 Tuner ModeInstant Tuner Access Naming the Preset Naming and Storing PresetsAfter which you are taken to the preset you have just stored Storing the PresetIntegrated Amplifier Model Selection Editing a PresetPreset Editing Sections Integrated Amplifier Model EditingBgain LVL Adig LVL Analog Wah EditingAvail Link for Pedal 1 OFF Noise Gate EditingConfig Series 4,4,4,4 Selecting Effect Configuration RoutesChanging Effect Modules Selecting a DefaultAdjusting the Module’s Parameters Custom DefaultsComparing Original Pst Comparing ChangesNaming the Default Storing/Naming DefaultsEditing a Module Storing the DefaultOutput Module Functions Scrolling through a Module’s PagesEffect Name Digital Effect Module Size and TypeChoruses Default ListAnalog Wah Parameters Effects LibraryAnalog Wah Amplifier TypesNoise Gate Parameters Noise GateStereo Reverb a true stereo version of the Reverb Module Digital EffectsReverbs ReverbReverb Parameters Gated ReverbTime Over TypeOver Freq Low PassChoruses and Flangers Chorus T C HChorus Parameters Flanger Parameters FlangerOut a B PhasersRanges from 0 to 60 milliseconds Over Rotary Speaker SimulatorMode LevelTremolo & Auto Panner Parameters Tremolo and Auto-PannerTremolo Auto PannerPitch Shifters Parameters Pitch Shifters and HarmonyDetuners Ranges from -50% to 50% DelaysSlapback delay effect. Ranges from 0 to 60 milliseconds Detuner ParametersDelay Parameters Compressor Parameters CompressorGraphic Equalizer Parameters EqualizersGraphic Equalizers Multi-Effect Module Parameters Multi Effects Modules Chorus/Delay and Flange/DelayParametric Equalizers Parametric Equalizer ParametersWhammy Effect Parameters Whammy EffectsAuto Wah Effect Parameters Auto WahLFOs Assigning ModifiersMidi CCs Dynamic ModifiersLinking a Parameter to a Modifier External Expression PedalsSetting up a Dynamic Modifier Setting up an LFOAmplifier Morphing Morphing Pedal AssignmentsMorphing Between Effect Modules Volume Pedal AssignmentsVol Pdl Morph Pdl Midi Merging Setting the Midi ChannelsPreset Receive Map Midi FunctionsSysEx Device Channel Preset Transmit MapSysExDump UserPst³PstNum Sysex DumpsSysEx Dump Bulk System After which it returns to the User default screenGlobal vs. Local XLR Cabinet Emulation Factory ResetOther Utility Functions Footswitch Set-Up Output ModeExpression Pedal Names Configuring the PedalboardConnecting the Johnson Amplification J-12 Foot Controller Assigning Functions Assigning Presets to FootswitchesPress the Preset button to exit Gain Exp 1 Min 56Max Assigning Parameters to Footswitches/ Expression PedalsTurn the Page knob to page 10 and the display reads Other Footswitch FunctionsAssigning Midi Control to the Expression Pedals 12 will appear like this When connected. The display now readsTurn Page knob to page 3 and the display will read Momentary Footswitch AssignmentNaming Banks Bank Up/ Tuner and Bank Down / Bypass FootswitchesUsing the Tuner Other Pedalboard TidbitsWill now read Available Link Un-Linking or Viewing Parameter ControlMatchless Bank 1 TopBank 2 Fender Bank 4 VoxStudio Bank 12 Alternative Bank 18 DynamicsBank 13 Country Bank 19 Morph Bank 14 VintageBank 3 Boogie/Soldano Millennium Preset DescriptionsBank 6 Marshall Bank 5 MatchlessBank 8 Signature Bank 13 Country Bank 12 AlternativeBank 16 Jazz/Fusion Bank 15 StudioBank 18 Dynamics ConfigStereo 2,2 ConfigParall 4,4,2 ConfigMonoSplit 4,4,4,4 Effect Configuration ChartHarmony Interval Charts Audio Inputs Power Amp SectionPower Requirements Audio OutputsRemarks Midi Implementation ChartLos Angeles, California 90056 USA 213 System Exclusive ImplementationMidi Basics Johnson AmplificationGeneral Format ProceduresSyshead 48h, dd1st1 dd1st2, ... ddnth1, ddnth2, F7h Ddn Request ONE Preset 01hBbs Vv = Software version number Rr =Tt = Syshead 17h, aa1, aa2,bbs1, bbs2, F7hNumber of available parameters in the FX Module Number of ModulesModules User requested Indicates the beginning of the xth ModuleSYSHEAD, 54h, cc, F7h 02h Effect Module 03h 04h Whole Effect ModuleSYSHEAD, 22h, F7h Reset Preset 20hKey Label Hex equivalent SysEx Button/Keys/Footswitch codesSysEx Preset Dump Example Fx Module codes and numbers PEQ 100 101 102 103 104 105 106 Section

Stereo150 specifications

Millennium Enterprises has long been recognized for its commitment to quality and innovation in the audio technology industry, and the Stereo150 amplifier is a testament to that legacy. This high-performance stereo amplifier is designed for audiophiles seeking exceptional sound quality and versatility in their media setups.

One of the standout features of the Stereo150 is its impressive power output. With a robust 150 watts per channel, it delivers clear, dynamic sound that can fill even the largest rooms with rich audio. The amplifier employs Class D technology, which not only enhances efficiency but also reduces heat generation, allowing it to operate for extended periods without the risk of overheating. This class of amplification is known for producing high fidelity sound while maintaining a compact form factor, making the Stereo150 an ideal choice for both home and professional setups.

The Stereo150 also incorporates advanced digital signal processing (DSP) technology. This allows for precise audio tuning, enabling users to tailor their listening experience according to their preferences. With customizable EQ settings, you can enhance low frequencies for a more bass-heavy sound or adjust high frequencies for clarity in vocals and instruments. This flexibility ensures that the Stereo150 can adapt to a wide variety of musical genres, from classical to rock to electronic.

Connectivity is another strong suit of the Stereo150. It features multiple input options, including RCA, balanced XLR, and optical inputs, facilitating seamless integration with various audio sources, such as turntables, CD players, and streaming devices. Additionally, the amplifier supports Bluetooth connectivity, making it easy to stream music directly from smartphones and tablets without the hassle of wires.

Durability and aesthetics have not been overlooked in the design of the Stereo150. The chassis is constructed from high-quality materials, providing both a modern look and sturdiness for long-term use. The front panel includes a user-friendly interface with LED indicators, making it easy to navigate settings and monitor the status of the amplifier.

In conclusion, the Millennium Enterprises Stereo150 stands out as a powerful, versatile, and aesthetically appealing stereo amplifier. Its combination of robust performance, advanced features, and diverse connectivity options make it an excellent choice for anyone looking to elevate their audio experience with high-quality sound. Whether used in a home theater, a studio, or for casual listening, the Stereo150 is poised to satisfy even the most discerning audio enthusiasts.
Top Page Image Contents