DigiTech GSP1101 owner manual FX Loop / Preamp Loop, Threshold Noise Gate only

Page 35

Selects the Noise Gate Selects the Auto Swell effect.

The Edit Effects/Preset Screen

FX LOOP / PREAMP LOOP

The GSP1101 features a configurable Loop that can be utilized as either an Effects Loop or as a Preamp Loop. As an Effects Loop, the GSP1101 offers a way to connect an external effects device that can be turned on and off within the signal chain. When configured as a Preamp Loop, you can switch between using an external preamp or the internal GSP1101 amp/preamp modeling. See page 45 for more information about using the loop.

GATE

A Noise Gate is designed to eliminate noise while you are not playing, or provide an auto volume swell effect. Parameters include:

Gate

Turns the Gate model on or off.

Model

Selects between the DigiTech® noise gate or the volume swell effect. Parameters include:

GATE

SWELL

Threshold (Noise Gate only)

Sets the signal strength (Threshold) required to open or close the Noise Gate. Ranges from 0 (opens easily) to 99 (requires strong signals to open).

Attack

Sets the attack time. Ranges from 0 (shorter attack time) to 99 (longer attack time).

Release

Sets the Release parameter. Ranges from 0 to 99.

Attenuation

Sets the Attenuation (amount of noise reduction) parameter. Ranges from 0 to 99.

Sensitivity (Auto Swell only)

Sets the Swell Sensitivity parameter of the Auto Swell. Ranges from 0 to 99.

29

GSP1101 Owner’s Manual

Image 35

Contents GSP1101 Guitar Preamp/ Processor Important Safety Instructions Electromagnetic Compatibility Warranty Contents Page Quick Start Make Connections Basic SetupSelect a Preset IntroductionTo Store/Copy a Preset Edit and Store a PresetTo Edit a Preset To use the Quick Edit screen Quick Edit ScreenFront Panel Effects Library Tuner / Setup WizardPower Tone LibraryRear Panel Loop Left Mono Return / Right Return Ground Lift SwitchMixer Outputs XLR Line OutputsGSP1101 Basics Using the GSP1101Setup Wizard Connect your guitar to the Input on the GSP1101 front panel Connect the amp’s Loop Send to GSP1101’s Loop Return To use the Setup Wizard Amp Model Effects highlighted are active Preset ScreenTo Select a new Tone Library Setting Selecting a PresetEditing a Preset Tone and Effect Libraries Rotary To Store and Rename a Preset Editing a Preset Individual ParametersEditing Expression Links Arrows More About Editing PresetsSeamless Time LFO SettingsPreset Level To change the level of a presetMain Menu Screen Contrast Factory ResetVersion Edit Effects/Preset screen Compressor WAHDistortion On/Off DistortionAmp On/Off Distortion Model ParametersPreamp / CAB Amp Model Master VolumeMidrange Cab ModelAmp Gain BassParametric EQ Sensitivity Auto Swell only FX Loop / Preamp LoopGate Threshold Noise Gate onlyChorus Model Parameters CHORUS/FXFX On/Off PositionFlanger Model Parameters Phaser Model ParametersDoppler SpeedDepth IntensitySensitivity VolumeChorus/Vibrato Waveform DigiTech Tremolo and Panner onlyBalance PedalVox Mix BlendShift Amount Pedal PositionLevel Dry Level KeyScale OctaveDelay Model Parameters DelayReverb Model Parameters ReverbExpression Links Seamless Time To set up Seamless TimePreset Level LFO SettingsTo set up the LFOs Guitar Tuner SetupLine Output Setup Global FunctionsTo change the XLR Out Level To configure the 1/4 Line OutputsCabinet to Amp XLR Out LevelType of Loop To change the Global Cabinet option USB SetupGlobal Cabinet Global EQ Midi Menu ContrastVersion CC/Controller Map Preset MapTo set up the Global Controller mapping To map Midi program change numbersMidi Tempo Preset LoadMerge In Thru Send Midi PrgmsTo do a Factory Reset Factory ResetAnalog Output Connections SpecificationsGeneral Specifications Analog Input ConnectionsUnit Dimensions Footswitch InputPower Requirements Power ConsumptionFunction Transmitted Recognized Remarks Midi Implementation TableUSB Block DiagramDC/AC Preset List