Global Functions
To switch the output option for the XLR Mixer Outputs
1.From the Preset screen, press the Edit/Select knob once to enter the Main Menu screen.
2.Turn the Edit/Select knob until I/O Setup is selected and press the knob.
3.Turn the Edit/Select knob and select the XLR Output menu.
4.Press the Edit/Select knob to switch between Stereo or Mono output.
5.Use the Back button to return to the Preset screen
Changes made in the XLR Output are saved automatically and will affect the global performance of the GSP1101 and all of its presets.
Type of Loop
The GSP1101 features a configurable Loop that can be utilized as either an Effects Loop or as a Preamp Loop. Depending on how you intend to use the GSP1101 in your system, you can select the loop to work in either of these two ways. As an Effects Loop, the GSP1101 offers a way to connect an external effects device that can be turned on and off within the signal chain. When configured as a Preamp Loop, you can connect an external guitar preamp, or if your guitar amplifier has an effects send/return, you can integrate its preamp with the GSP1101 effects and switch between using an external preamp or the internal GSP1101 amp/preamp modeling. There are three options for how the GSP110 Loop can be configured:
Effect Loop
This option configures the Loop to behave like a standard series effects loop. External effects are connected as if they were inline effects that are switched in and out. If the external effect has an effect balance or mix control, this control should be set to a 50/50 mix of wet/dry signal.
External Preamp Only
This option configures the Loop as a global external loop for use with your favorite preamp. All presets will utilize the external preamp as the primary tone source and bypass any GSP1101 amp/preamp models even if they are active in the preset. Only use this option if you do not ever want to use any of the internal amp/preamp models the GSP1101 has to offer.
Int/Ext Preamp
This option configures the Loop to work with both an external preamp source and the internal GSP1101 amp/preamp models. This option lets you switch between internal and external preamp sources and program them on a preset basis.
To change the Type of Loop options
1.From the Preset screen, press the Edit/Select knob once to enter the Main Menu screen.
45
GSP1101 Owner’s Manual