DigiTech GSP1101 owner manual Preset Load, Merge In Thru, Send Midi Prgms, Midi Tempo

Page 56

Global Functions

Merge In > Thru

By setting the Merge In>Thru option to ON, incoming MIDI CC and program change messages are routed out of the GSP1101’s MIDI Thru jack to other connected MIDI devices.These messages do not pass through the GSP1101 when the Merge In>Thru is set to OFF. This option is set to ON from the factory.

To configure the MERGE IN > THRU option

1.From the Preset screen, press the Edit/Select knob.

2.Turn the Edit/Select knob until the MIDI menu is selected and press the knob.

3.Turn the Edit/Select knob until Merge In->Thru is selected.

4.Press the Edit/Select knob to turn the option on or off.

5.Press the Back button to return to the previous menu.

Send MIDI Prgms

By setting the Send MIDI Prgms option to ON, MIDI program change messages will be sent out the GSP1101’s MIDI Thru jack when presets are changed on the GSP1101 either by the front panel Edit/Select knob, by selecting them in the editor librarian, or when the GSP1101 receives a program change message via MIDI. These MIDI program change messages do not get sent out of the GSP1101 when Send MIDI Prgms is set to OFF. This option is set to OFF from the factory.

MIDI Tempo

The GSP1101’s MIDI Tempo option allows incoming MIDI time code to set the delay time of the delay effects. When this option is set to ON, the GSP1101 delays respond to MIDI time messages it receives.

To set the MIDI Tempo

1.From the Preset screen, press the Edit/Select knob.

2.Turn the Edit/Select knob until the MIDI menu is selected and press the knob.

3.Turn the Edit/Select knob until Merge Tempo is selected.

4.Press the Edit/Select knob to turn the option on or off.

5.Press the Back button to return to the previous menu.

Preset Load

From the factory the GSP1101 is set to automatically load presets when they are selected using the Edit/Select knob. Presets can be loaded manually if needed by setting the Preset Load option to MANUAL. This way you can cue up a preset and it is not loaded until the Edit/Select knob is pressed. If you don’t load a preset after four seconds, the numeric display returns to the current preset.

To set the Preset Load setting

1.From the Preset screen, press the Edit/Select knob.

2.Turn the Edit/Select knob until Preset Load is selected.

3.Press the Edit/Select knob to choose between AUTO or MANUAL option.

4.Press the Back button to return to the previous menu.

GSP1101 Owner’s Manual

50

Image 56
Contents GSP1101 Guitar Preamp/ Processor Important Safety Instructions Electromagnetic Compatibility Warranty Contents Page Make Connections Basic Setup Select a PresetIntroduction Quick StartTo Store/Copy a Preset Edit and Store a PresetTo Edit a Preset Quick Edit Screen To use the Quick Edit screenFront Panel Tuner / Setup Wizard PowerTone Library Effects LibraryRear Panel Ground Lift Switch Mixer Outputs XLRLine Outputs Loop Left Mono Return / Right ReturnUsing the GSP1101 GSP1101 BasicsSetup Wizard Connect your guitar to the Input on the GSP1101 front panel Connect the amp’s Loop Send to GSP1101’s Loop Return To use the Setup Wizard Preset Screen Amp Model Effects highlighted are activeTo Select a new Tone Library Setting Selecting a PresetEditing a Preset Tone and Effect Libraries Rotary Editing a Preset Individual Parameters To Store and Rename a PresetEditing Expression Links More About Editing Presets ArrowsLFO Settings Preset LevelTo change the level of a preset Seamless TimeMain Menu Screen Contrast Factory ResetVersion Edit Effects/Preset screen WAH CompressorDistortion Distortion On/OffAmp On/Off Distortion Model ParametersPreamp / CAB Master Volume Amp ModelCab Model Amp GainBass MidrangeParametric EQ FX Loop / Preamp Loop GateThreshold Noise Gate only Sensitivity Auto Swell onlyCHORUS/FX FX On/OffPosition Chorus Model ParametersPhaser Model Parameters Flanger Model ParametersSpeed DepthIntensity DopplerVolume Chorus/VibratoWaveform DigiTech Tremolo and Panner only SensitivityBalance PedalVox Blend Shift AmountPedal Position MixLevel Key ScaleOctave Dry LevelDelay Delay Model ParametersReverb Reverb Model ParametersExpression Links To set up Seamless Time Seamless TimePreset Level LFO SettingsTo set up the LFOs Setup Line Output SetupGlobal Functions Guitar TunerTo configure the 1/4 Line Outputs Cabinet to AmpXLR Out Level To change the XLR Out LevelType of Loop To change the Global Cabinet option USB SetupGlobal Cabinet Global EQ Midi Menu ContrastVersion Preset Map To set up the Global Controller mappingTo map Midi program change numbers CC/Controller MapPreset Load Merge In ThruSend Midi Prgms Midi TempoFactory Reset To do a Factory ResetSpecifications General SpecificationsAnalog Input Connections Analog Output ConnectionsFootswitch Input Power RequirementsPower Consumption Unit DimensionsMidi Implementation Table Function Transmitted Recognized RemarksBlock Diagram USBPreset List DC/AC