DigiTech GSP1101 owner manual Expression Links

Page 46

The Edit Effects/Preset Screen

EXPRESSION LINKS

Each preset in the GSP1101 can have up to 8 expression links for real-time parameter control during performance. Parameters can be assigned to MIDI CCs, internal LFOs or to expression pedals.The way in which the GSP1101 provides control over parameters is via Global Controllers. These Global Controllers are configured in the CC/Controller Map menu (see page 49). There are 16 Global Controllers that can be assigned in any way to any of the GSP1101 presets. These Global Controllers must be setup first before any Expression Links can be made in presets (see CC/Controller Map on page 49 for more information on setting up Global Controllers). From the factory, the Global Controllers have been assigned to some MIDI CCs already, but feel free to make changes to these assignments for your own needs.

To assign Expression Links to parameters via the Expression Links screen

1.From the Preset screen, press the Edit/Select knob twice.This takes you to the Preset Edit screen.

2.Turn the Edit/Select knob to highlight the “EXPRESSION LINKS” menu and press the Edit/Select knob.The “Edit Expression Links“ screen will be displayed.

3.In the “Edit Expression Links” screen, there is a numbered list.The numbers on the left side of the screen each represent an Expression Link. For this example, highlight “3 NO CTRL NO LINK” and press the Edit/Select knob. “Linking NO LINK” will be displayed and “ASSIGN CONTROLLER” will be highlighted in the display.

4.Use the Edit/Select knob to scroll to the “LINKED TO NO LINK” menu and press the knob. “LINKING CTRL NO CTRL TO” will be displayed.

5.Use the Edit/Select knob to select the parameter from the GSP1101’s available parameters you want linked. For our example we will link WAH PEDAL. Once you have the parameter selected, press the Back button.

6.Use the Edit/Select knob to scroll up to the “ASSIGN CONTROLLER” menu and press the knob. “Linking WAH PEDAL CONTROLLER=NOT LINKED” will be displayed.

7.Use the Edit/Select knob to select which of the 16 Global Controllers or 2 LFOs you want to control the parameter. For our example we will select “CONTROLLER=12 <CC 7>. Press the Back button to return to previous menu.

8.The Wah Pedal parameter is now linked to be controlled by MIDI CC 7. You can now adjust the parameter’s Min and Max ranges by entering the “MIN VALUE” and “MAX VALUE” menus if you don’t want to use the parameter’s full range, which is the default.

9.Store these changes to the preset using the Store procedure if these changes are to be recalled later.

Expression links can also be assigned directly from the parameter you want to link to.

GSP1101 Owner’s Manual

40

Page 45 Page 47
Image 46
Page 45 Page 47
Contents GSP1101 Guitar Preamp/ Processor Important Safety Instructions Electromagnetic Compatibility Warranty Contents Page Introduction Make Connections Basic SetupSelect a Preset Quick StartTo Edit a Preset Edit and Store a PresetTo Store/Copy a Preset Quick Edit Screen To use the Quick Edit screenFront Panel Tone Library Tuner / Setup WizardPower Effects LibraryRear Panel Line Outputs Ground Lift SwitchMixer Outputs XLR Loop Left Mono Return / Right ReturnUsing the GSP1101 GSP1101 BasicsSetup Wizard Connect your guitar to the Input on the GSP1101 front panel Connect the amp’s Loop Send to GSP1101’s Loop Return To use the Setup Wizard Preset Screen Amp Model Effects highlighted are activeEditing a Preset Tone and Effect Libraries Selecting a PresetTo Select a new Tone Library Setting Rotary Editing a Preset Individual Parameters To Store and Rename a PresetEditing Expression Links More About Editing Presets ArrowsTo change the level of a preset LFO SettingsPreset Level Seamless TimeMain Menu Screen Version Factory ResetContrast Edit Effects/Preset screen WAH CompressorDistortion Distortion On/OffPreamp / CAB Distortion Model ParametersAmp On/Off Master Volume Amp ModelBass Cab ModelAmp Gain MidrangeParametric EQ Threshold Noise Gate only FX Loop / Preamp LoopGate Sensitivity Auto Swell onlyPosition CHORUS/FXFX On/Off Chorus Model ParametersPhaser Model Parameters Flanger Model ParametersIntensity SpeedDepth DopplerWaveform DigiTech Tremolo and Panner only VolumeChorus/Vibrato SensitivityVox PedalBalance Pedal Position BlendShift Amount MixLevel Octave KeyScale Dry LevelDelay Delay Model ParametersReverb Reverb Model ParametersExpression Links To set up Seamless Time Seamless TimeTo set up the LFOs LFO SettingsPreset Level Global Functions SetupLine Output Setup Guitar TunerXLR Out Level To configure the 1/4 Line OutputsCabinet to Amp To change the XLR Out LevelType of Loop Global Cabinet USB SetupTo change the Global Cabinet option Global EQ Version ContrastMidi Menu To map Midi program change numbers Preset MapTo set up the Global Controller mapping CC/Controller MapSend Midi Prgms Preset LoadMerge In Thru Midi TempoFactory Reset To do a Factory ResetAnalog Input Connections SpecificationsGeneral Specifications Analog Output ConnectionsPower Consumption Footswitch InputPower Requirements Unit DimensionsMidi Implementation Table Function Transmitted Recognized RemarksBlock Diagram USBPreset List DC/AC
Top Page Image Contents