DigiTech GSP1101 Cabinet to Amp, To configure the 1/4 Line Outputs, XLR Out Level, XLR Output

Page 50

Global Functions

Combo, American Tube Stack, American Solid State Stack, British Tube Combo, British Class A Combo, British Solid State Combo, British Tube Stack, British Solid State Stack.

Cabinet to Amp

This option lets you route the guitar audio through the GSP1101’s cabinet modeling or around it before it is sent to the 1/4” Line Outputs.

To configure the 1/4” Line Outputs

1.From the Preset screen, press the Edit/Select knob once to enter the Main Menu screen.

2.Turn the Edit/Select knob until the I/O Setup menu is selected and press the knob again.

3.Turn the Edit/Select knob until 1/4” Line Output Setup is selected and press the knob. Select from the three options and setup each based upon how the GSP1101 is connected to your system.

4.Press the Back button to exit.

Changes made in the 1/4” Output Setup menu are saved automatically and will affect the global performance of the GSP1101 and its presets.

XLR Out Level

The XLR Mixer Outputs can be set to different output levels. These options include fixed -10dBV, fixed +4dBu, or Variable. When the fixed output levels are selected, the front panel Output Level does not control the output of the XLR Mixer Outputs. If there is a need to vary the output level of the XLR Mixer Outputs,Variable should be selected which links the Output Level on the front panel to control their output level.

To change the XLR Out Level

1.From the Preset screen, press the Edit/Select knob once to enter the Main Menu screen.

2.Turn the Edit/Select knob until the I/O Setup menu is selected and press the knob again.

3.Turn the Edit/Select knob until XLR Out Level is selected and press the knob. Select from the three output level options.

4.Press the Back button two times to exit back to the Preset screen.

Changes made in the XLR Out Level menu are saved automatically and will affect the global performance of the GSP1101 and its presets.

XLR Output

The GSP1101 XLR Mixer outputs are set to stereo by default. If there is a need to only use one of these outputs, it is best to switch them to be mono outputs (both outputs sum the left/right channels to mono and output the same signal in each output).

GSP1101 Owner’s Manual

44

Page 49 Page 51
Image 50
Page 49 Page 51
Contents GSP1101 Guitar Preamp/ Processor Important Safety Instructions Electromagnetic Compatibility Warranty Contents Page Introduction Make Connections Basic SetupSelect a Preset Quick StartTo Store/Copy a Preset Edit and Store a PresetTo Edit a Preset Quick Edit Screen To use the Quick Edit screenFront Panel Tone Library Tuner / Setup WizardPower Effects LibraryRear Panel Line Outputs Ground Lift SwitchMixer Outputs XLR Loop Left Mono Return / Right ReturnUsing the GSP1101 GSP1101 BasicsSetup Wizard Connect your guitar to the Input on the GSP1101 front panel Connect the amp’s Loop Send to GSP1101’s Loop Return To use the Setup Wizard Preset Screen Amp Model Effects highlighted are activeTo Select a new Tone Library Setting Selecting a PresetEditing a Preset Tone and Effect Libraries Rotary Editing a Preset Individual Parameters To Store and Rename a PresetEditing Expression Links More About Editing Presets ArrowsTo change the level of a preset LFO SettingsPreset Level Seamless TimeMain Menu Screen Contrast Factory ResetVersion Edit Effects/Preset screen WAH CompressorDistortion Distortion On/OffAmp On/Off Distortion Model ParametersPreamp / CAB Master Volume Amp ModelBass Cab ModelAmp Gain MidrangeParametric EQ Threshold Noise Gate only FX Loop / Preamp LoopGate Sensitivity Auto Swell onlyPosition CHORUS/FXFX On/Off Chorus Model ParametersPhaser Model Parameters Flanger Model ParametersIntensity SpeedDepth DopplerWaveform DigiTech Tremolo and Panner only VolumeChorus/Vibrato SensitivityBalance PedalVox Pedal Position BlendShift Amount MixLevel Octave KeyScale Dry LevelDelay Delay Model ParametersReverb Reverb Model ParametersExpression Links To set up Seamless Time Seamless TimePreset Level LFO SettingsTo set up the LFOs Global Functions SetupLine Output Setup Guitar TunerXLR Out Level To configure the 1/4 Line OutputsCabinet to Amp To change the XLR Out LevelType of Loop To change the Global Cabinet option USB SetupGlobal Cabinet Global EQ Midi Menu ContrastVersion To map Midi program change numbers Preset MapTo set up the Global Controller mapping CC/Controller MapSend Midi Prgms Preset LoadMerge In Thru Midi TempoFactory Reset To do a Factory ResetAnalog Input Connections SpecificationsGeneral Specifications Analog Output ConnectionsPower Consumption Footswitch InputPower Requirements Unit DimensionsMidi Implementation Table Function Transmitted Recognized RemarksBlock Diagram USBPreset List DC/AC
Top Page Image Contents