JVC GR DVL 200 specifications GR-DVL200EG Owners How To Attach The Core Filter

Page 5

EN5

GR-DVL200EG Owners:

How To Attach The Core Filter

Attach the provided Core Filter to an optional S-Video cable. The Core Filter reduces interference.

1

Stopper

Release the stoppers on both ends of the Core Filter.

2

3 cm

 

 

 

 

Wind once

Run the cable through the Core Filter, leaving approx. 3 cm of cable between the cable plug and the Core Filter. Wind the cable once around the outside of the Core Filter as shown in the illustration.

Wind the cable so that it is not slack.

NOTE:

Take care not to damage the cable.

3

Close the Core Filter until it clicks shut.

When connecting cables, attach the end with the Core Filter to the camcorder.

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when

“DEMO. MODE” is set to “ON” (factory-preset).

 Available when the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder.

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is per- formed for more than 1 minute after that, the demonstra- tion will resume.

“DEMO. MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration, set the Power Switch to “ ”, then press MENU/BRIGHT while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the Menu Screen). Rotate MENU/BRIGHT to select “OFF” and press it. The normal screen appears.

MENU/BRIGHT Wheel

CAMERA MENU

1RETURN

 

REC MODE

 

SOUND MODE

 

ZOOM

 

GA I N UP

 

TAL L Y

 

I D NUMBER

 

DEMO. MODE

ON

S I DE LED

OF F

GR-DVL200EG only

Image 5
Contents GR-DVL200 It is recommended that you Dear CustomerAbove ALL EN3CD-ROM Release the stoppers on both ends of the Core Filter GR-DVL200EG Owners How To Attach The Core FilterCharging the Battery Pack PowerLithium-ion is vulnerable in colder temperatures About BatteriesUsing AC Power Using the Battery PackTo Detach The Battery Pack InformationViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod MountingPress MENU/BRIGHT. The Menu Screen appears Date/Time SettingsLoading/Unloading a Cassette 10 ENEN11 Recording Mode SettingSet the tape recording mode depending on your preference 12 EN Picture Quality Mode SettingEN13 Operation ModeOFF Video14 EN To Adjust The Brightness Of The DisplayWhile recording is in progress To Stop RecordingSELF-RECORDING EN15Journalistic Shooting Snapshot Mode Selection Power Switch Snapshot For Video RecordingMotor Drive Mode 16 ENAvailable Snapshot modes are the same as those on pg Basic Shooting SnapshotImage is stored in the camcorder’s built-in memory To Delete Unwanted Still Images18 EN Slide the Power Zoom Lever towards TZoom Zoom OutProper recording When a blank portion is recorded on a tapeEN19 To brighten the scene when natural lighting is too dim Feature Video Light20 EN Set Light OFF/AUTO/ON as requiredFeature Manual Focus Feature Auto FocusEN21 To obtain correct focusAppears Using Menus For Detailed AdjustmentSee pg Go to stepMenu Screen Explanations EN23 Menu Screen Explanations EN25 To Deactivate The Selected Effect Fade/Wipe EffectsSelect OFF in step If you select Picture Wipe/Dissolve during recordingFader And Wipe Menu EN27Programme AE With Special Effects To Deactivate The Selected ModeEN29 Exposure ControlIris Lock Manual White Balance Operation White Balance AdjustmentTo Return To Automatic White Balance To Change The Tint For RecordingAvailable only with the remote control provided  pg To Control The Speaker VolumeEN31 Playback Zoom and Playback Special EffectsUsing Menus For Detailed Adjustment EN33 Playback SoundDisplay Normal Playback 34 ENEN35 Index ScreenIndex Playback After , press 4/6. To stop the Slide Show, press 36 ENSlide Show EN37 Protecting ImagesTo Protect AN Image To Remove ProtectionTo Delete ALL Images 38 ENYou can initialise the camcorder’s built-in memory anytime Initialising The Built-in MemoryEN39 40 EN EN41 If using a VCR . . . go to step If not . . . go to stepConnection To a Personal Computer 42 ENMake sure all units are turned off Connection To a Video Unit Equipped With a DV ConnectorEN43 VCR Recording deck 44 ENDubbing To a VCR EN45 Memory To a Tape Indicator disappears when dubbing is complete46 EN EN47 Dubbing Images Recorded On a Tape To The Built-in Memory48 EN Installing The BatteriesFF Button EN49Feature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom 50 ENEN51 Feature Playback Special Effects52 EN VCR Code ListRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodeEN53 JVC VCR equipped with a remote pause connectorMake Connections VCR other than aboveSelect Scenes 54 ENAutomatic Editing to VCR EN55For More Accurate Editing 56 ENDiagnosing VCR/CAMCORDER Timing Recording deckEN57 Adjustment of VCR/CAMCORDER Timing58 EN Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackCorrective Action Clean the lens and checkBright Dark place, or the contrast Focus again  pg Was low60 EN TroubleshootingEN61 62 EN Blink Or channel appropriate Video mode For video playbackEN63 64 EN Press Battery Release and remove the battery pack After Use Cleaning The CamcorderTurn off the camcorder Press Push Here to close the cassette holder345 6 7 # $ % 66 ENEN67 68 EN Automatically adjusted Appears when Digital Image Stabiliser DIS is engagedEN69 Approximate zoom ratio Appears during ZoomingLCD Monitor/Viewfinder Indications During Video Playback 1Displays the sound modeLCD Monitor/Viewfinder Indications During D.S.C. Playback 5Displays the time codeFunction EN71Check TAPE’S Erase Protection Switch DUB ErrorUnit in Safeguard Mode RemoveTo avoid hazards To prevent damage and prolong service lifeEN73 74 EN Serious malfunctioning EN75About moisture condensation Date/Time Display  pg , 32 76 ENIcons  pg LCD monitor/Viewfinder  pg IndicationsTime Code  pg , 25, 32 EN77For General 78 ENFor Digital Video Camera For Digital Still CameraEN79 For ConnectorsGR-DVL200