JVC GR DVL 200 specifications EN61

		EN61
SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
15. The Picture Wipe and	15. • The last selected editing	15. • Select Picture Wipe or
Dissolve functions do not	scene is ending.	Dissolve before beginning
work.	• At the end of the last	recording. The effects are
	selected scene for editing,	then automatically activated
	the Power Switch was set to	( pg. 26).
	“OFF”.	• Do not turn off the
	• The power is off.	camcorder’s power after
		setting Edit-In and Edit-Out
		points, as they will all be
		erased ( pg. 26).
		• The camcorder automati-
		cally shuts off after 5 minutes
		have elapsed in the Record-
		Standby mode. Make sure
		you continue operations
		within 5 minutes after
		engaging Record-Standby
		mode ( pg. 26).
16. The picture wipe function	16 • The Slow Shutter mode is	16. • Disengage the Slow Shutter
does not work.	activated.	mode or set “WIDE MODE”
	•“WIDE MODE” is not set to	to “OFF” before preparing
	“OFF”.	to use the Picture Wipe
		( pg. 24, 26, 28).
17. Scene transition does not	17. • When using “Picture Wipe/	17.
go as expected.	Dissolve” ( pg. 26), there
	is a delay of a fraction of a
	second between the
	previous record stop-point
	and the Dissolve start-point.	————
	This is normal, but this slight
	delay becomes especially
	noticeable when shooting
	fast-moving subject or
	during rapid panning.
18. The Video Echo mode	18. • The Picture Wipe or	18. • Set “WIDE MODE” to
does not work.	Dissolve functions are in use.	“CINEMA” or “OFF” mode
	•“WIDE MODE” is set to	( pg. 24).
	“SQUEEZE” in the Menu	• Do not try to use the Video
	Screen.	Echo mode during a Fade-In
	• A Fade-In or Fade-Out is in	or Fade-Out ( pg. 26, 28).
	progress.
19. Even when Slow Shutter is	19 • When shooting in the dark,	19. • If you want the lighting to
not selected, the image	the unit becomes highly	look more natural, set GAIN
looks like it is activated.	sensitive to light and the	UP to “AGC” or “OFF” in
	image takes on an effect	the Menu Screen
	similar to Slow Shutter.	( pg. 23).
20. There is no strobe when	20. • The Picture Wipe or	20. • Do not try to use the Classic
the Classic Film or Strobe	Dissolve function is in use.	Film or Strobe mode during
mode is activated.		a scene transition
		( pg. 26, 28).

CONTINUED ON NEXT PAGE