NOTES:
●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.
●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.
●A blank portion which is shorter than 5 seconds of tape may not be detected.
●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.
Connections To A TV Or VCR
Open the cover.
To S connector
| To AV connector |
S cable | AV cable |
(optional) | (provided) |
1 2
3
4
TV
VCR
VIDEO PLAYBACK EN 23
A Black to
B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
C Red to AUDIO R IN* D White to AUDIO L IN*
* Not required for watching still images only.
NOTE:
The
1 Make sure all units are turned off. | PLAYBACK | |
2 Connect the camcorder to a TV or VCR as | ||
shown in the illustration. | ||
If using a VCR, go to step 3. | ||
& | ||
If not, go to step 4. | ||
RECORDING | ||
3 Connect the VCR output to the TV input, | ||
referring to your VCR’s instruction manual. | ||
4 Turn on the camcorder, the VCR and the TV. | ||
5 Set the VCR to its AUX input mode, and set | ||
VIDEO | ||
the TV to its VIDEO mode. | ||
6 Start playback on the camcorder. ( pg. 22) | ||
|
To choose whether or not the following displays appear on the connected TV
● Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 37, 42)
Or, press DISPLAY on the remote control to turn on/off the date indication.
● Time code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 37, 42)
● Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 37, 42)
CONTINUED ON NEXT PAGE