JVC GR-DF473, GR-DF573 Digital Dubbing, Editing EN, Connect this camcorder to a video unit

Dubbing To Or From A Video Unit

Equipped With A DV Connector

(Digital Dubbing)

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.

To DV IN/OUT

Core filter DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

EDITING EN 53

To use this camcorder as a player

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Start playback on the camcorder. (
pg. 22)

4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)

5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.

NOTES:

● It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 15)

● If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

● Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.

● If “Playback Zoom”
( pg. 27) or “Playback Special Effects” (
pg. 27) is attempted or SNAPSHOT is pressed during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

● When using a DV cable, be sure to use the

optional JVC VC-VDV204U DV cable.			FEATURES
To use this camcorder as a recorder
1 Make sure all units are turned off.
			ADVANCED
2 Connect this camcorder to a video unit
equipped with a DV output connector using a DV
cable as shown in the illustration.
3 Set the camcorder’s Power Switch to “PLAY”.
4 Set “REC MODE” to “SP” or “LP” .pg(. 42)
5 Press the Recording Start/Stop Button to
engage the Record-Pause mode.
● The		” indication appears on the screen.
	DV IN
6 Start	playback on the player.
7 At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The		indication rotates.

8 Press the Recording Start/Stop Button again

to stop dubbing. The indication stops rotating.

9 Press 8 to return to the normal playback mode.

CONTINUED ON NEXT PAGE