JVC GR-DF573, GR-DF473 instruction manual Wipe Or Fader Effects, Program AE With Special Effects

48 EN FEATURES FOR RECORDING

		Wipe Or Fader Effects					WIPE–SLIDE : Wipe in from right to left, or
				wipe out from left to right.
							WIPE–DOOR : Wipe in as the two halves of
These effects let you make pro-style scene
transitions. Use them to spice up the transition				a black screen open to the left and right,
from one scene to the next.				revealing the scene, or wipe out and the black
Wipe or Fader works when video recording is				screen reappears from left and right to cover the
				scene.
started or stopped.
							WIPE–SCROLL : The scene wipes in from
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
				the bottom to the top of a black screen, or wipes
2 Set the Power Switch to “M”.				out from top to bottom, leaving a black screen.
3 Set “v” to the desired mode. ( pg. 37)							WIPE–SHUTTER : Wipe in from the centre
● The WIPE/FADER menu disappears and the				of a black screen toward the top and bottom, or
	effect is reserved.			wipe out from the top and bottom toward the
● The selected effect indicator appears.				centre leaving a black screen.
4 Press the Recording Start/Stop Button to						Program AE With Special Effects
activate the Fade-in/out or Wipe-in/out.
To deactivate the selected effect
				1 Set the Power Switch to “M”.
Select “OFF” in step3. The effect indicator
disappears.							r
				2 Set “ ” to the desired mode. ( pg. 37)
NOTES:				● The PROGRAM AE menu disappears and the
					selected effect is activated.
● You can extend the length of a Wipe or Fader by
				● The selected effect indicator appears.
	pressing and holding the Recording Start/Stop
				To deactivate the selected effect
	Button.
● Some Wipe/Fader Effects cannot be used with				Select “OFF” in step2. The effect indicator
	certain modes of Program AE with special effects.			disappears.
	(See the right column.) In this case, the selected			NOTES:
	indicator blinks or goes out.
			WIPE/FADER	● Program AE with special effects cannot be
					changed during recording.
				● Some modes of Program AE with special effects
OFF: Disables the function. (Factory-preset)					cannot be used during Night Scope.
			FADER–WHITE : Fade in or out with a white	● When a subject is too bright or reflective, a vertical
screen.					streak may appear (smear phenomenon). Smear
					phenomenon tends to occur when “SPORTS” or
			FADER–BLACK : Fade in or out with a black		any mode of “SHUTTER 1/250 – 1/4000” is
screen.					selected.
			FADER–B.W : Fade in to a colour screen	● Some modes of Program AE with special effects
					cannot be used with certain Wipe/Fader effects.
from a black and white screen, or fade out from
					(See the left column.) In this case, the selected
colour to black and white.
					indicator blinks or goes out.
			WIPE–CORNER : Wipe in on a black screen
from the upper right to the lower left corner, or
wipe out from lower left to upper right, leaving a
black screen.
			WIPE–WINDOW : The scene starts in the
centre of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the centre.