CHECK CARD’S WRITE PROTECTION SWITCH
●Appears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the “LOCK” position.
●Appears when you attempt MEMORY SELECT menu operation with a write- protected SD Memory Card loaded.
UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY
The error indications (01, 02 or 06) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
UNIT IN SAFEGUARD MODE
EJECT AND REINSERT TAPE
The error indications (03 or 04) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re- insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
USER MAINTENANCE EN 61
Cleaning The Camcorder
Before cleaning, turn off the camcorder and remove the battery pack and AC Adapter.
To clean the exterior
Wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.
To clean the lens
Blow it with a blower brush, then wipe gently with lens cleaning paper.
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol.
●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
●Mould may form if the lens is left dirty.
●When using a cleaner or chemically treated cloth refer to the cautions of each product.
●To clean the viewfinder, please consult your nearest JVC dealer.
REFERENCES
CONTINUED ON NEXT PAGE