JVC GR-DF573, GR-DF473 instruction manual Biphonic Playback, Video Playback

24 EN	VIDEO PLAYBACK
			Biphonic Playback
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.		You can reproduce real three-dimensional
( pg. 15)
● To monitor the picture and sound from the		acoustic fields on a conventional TV, VCR, or
camcorder without inserting a tape or memory		stereo system connected to the camcorder.
card, set the camcorder’s Power Switch to “A” or		1 Shoot a video in Biphonic Recording mode.
“M”, then set your TV to the appropriate input
mode.		( pg. 51)
● Make sure you adjust the TV sound volume to its		2 Connect the camcorder to a TV, VCR, or
minimum level to avoid a sudden burst of sound		stereo system. ( pg. 23)
when the camcorder is turned on.		3 Perform steps 1 – 3 in “Normal Playback”
		( pg. 22).
		4 Press BIPHONIC to change the setting.
				A” or	“		A”*: Biphonic mode is
		“
		automatically engaged when the camcorder
		detects footage recorded with the Mic for
		Biphonic while “AUX MIC” is set to “BIPHONIC”.
				ON” or		“	ON”*: Biphonic mode is
		“
		engaged.
		No indication: Biphonic mode is disengaged.
		* “		” appears when the camcorder detects

footage recorded while “AUX MIC” is set to “NORMAL”

NOTES:

● As long as you use the Mic for Biphonic, even if “AUX MIC” is set to “NORMAL” on Biphonic Recording, you can obtain a Biphonic effect by

selecting “ ON” on the playback.

● Make sure that Biphonic mode is disengaged when you use headphones at Biphonic playback to obtain genuine Biphonic effect.

● When you use a microphone other than the Mic

for Biphonic during Biphonic Recording, you
cannot obtain an expected effect even if “	ON”

or “ ON” is selected on the playback. 5 To start playback, press 4/9.

NOTES:

● Stereo speakers (incorporated in a TV) are required for Biphonic playback.

● Biphonic effect is maximized in the following cases:

• When you enjoy the video on a big screen TV.

• When the distance between the left and right speakers is sufficient.

• When you position at front center of both speakers.