JVC GR-DF573, GR-DF473 Dubbing To Or From a VCR, To use this camcorder as a recorder

52 EN EDITING
Dubbing To Or From A VCR				NOTES:
				● It is recommended to use the AC Adapter as
	Open the cover.			the power supply instead of the battery pack.
				( pg. 15)
To S connector				● To choose whether or not the following displays
				appear on the connected TV
				• Date/time
				Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
				( pg. 37, 42) Or, press DISPLAY on the
		To AV connector		remote control to turn on/off the date indication.
				• Time code
				Set “TIME CODE” to “OFF” or “ON”.
				( pg. 37, 42)
				• Indications other than date/time and time code
			AV cable	Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
S cable				TV”. ( pg. 37, 42)
			(provided)
(optional)				To use this camcorder as a recorder
				1 Following the illustrations, connect the
				camcorder and the VCR’s output connectors.
1	2	3	4	2 Set “REC MODE” to “SP” or “LP” .pg(. 38)
				3 Set the camcorder’s Power Switch to “PLAY”.
TV				4 Set “S/AV INPUT” to “ON” . (pg. 37, 42)
				5 Press the Recording Start/Stop Button to
		VCR		engage the Record-Pause mode.
				● The	A/V IN	” indication appears on the screen.
				6 Start playback on the player.
A To S-VIDEO IN or OUT*				7 At the point you want to start dubbing, press
B Yellow to VIDEO IN or OUT
				the Recording Start/Stop Button to start
C Red to AUDIO R IN or OUT
				dubbing. The		indication rotates.
D White to AUDIO L IN or OUT				8 Press the Recording Start/Stop Button again
* Connect when your TV/VCR has an S-VIDEO IN/
OUT connector. In this case, it is not necessary to				to stop dubbing. The			indication stops
				rotating.
connect the yellow video cable.
				9 Press 8 to return to the normal playback
NOTE:
				mode.
The S-Video cable is optional. Be sure to use the
				NOTES:
YTU94146A S-Video cable. Consult the JVC
Service Center described on the sheet included				● After dubbing, set “S/AV INPUT” back to “OFF”.
in the package for details on its availability.				● Analogue signals can be converted to digital
Make sure to connect the end with a core filter				signals with this procedure.
to the camcorder. The core filter reduces				● It is also possible to dub from another camcorder.
interference.

To use this camcorder as a player

1 Following the illustrations, connect the camcorder and the VCR’s input connectors.

2 Start playback on the camcorder. (
pg. 22)

3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.