JVC GR-DVL822U specifications Normal Playback, To Control The Speaker Volume

Page 21
Load a tape ( pg. 12).

TAPE PLAYBACK

EN 21

Stop Button (5)

Rewind Button (2)

Play/Pause Button (4/6)

Fast-Forward Button (3)

Power Zoom Lever (VOL.)

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

Speaker

Normal Playback

1

2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2to rewind, or 3to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

..... slide the Power Zoom Lever (VOL.) towards “+”

to turn up the volume, or towards “–” to turn down the volume.

NOTES:

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 22).

●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●LCD monitor/viewfinder indications:

•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied from an AC outlet: “ ” does not appear.

•During Stop mode, none of the indications are displayed.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6 again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.

Shuttle Search: Allows high-speed search in either direction.

1)Press 3for forward or 2for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Frame-By-Frame Playback: Allows frame-by-frame search.

1)Engage Still Playback.

2)Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse

Frame-By-Frame Playback during Still Playback.

●To resume normal playback, press 4/6.

Playback Zoom

Available only with the remote control (provided) ( pg. 55).

ATTENTION

During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents GR-DVL822 It is recommended that you Dear CustomerImportant Product Safety Instructions Before recording an important scene Ø3.5 mini-plug to To the camcorder Camcorder USB Cable Video cableRCA plug MB Already insertedAbout 3 minutes after the Power Switch is set to How To Attach The Lens CapSet the Power Switch to While pressing downGetting Started Charging the Battery Pack PowerBattery pack Charging time To Detach The Battery PackUsing AC Power Using the Battery PackAbout Batteries Approximate recording timeViewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings MENU/BRIGHT Wheel Power LampLock Button Display Approximate recording time Tape Recording mode 12 ENLoading/Unloading a Cassette Set the tape recording mode depending on your preference Recording Mode SettingSP mode Audio Dubbing  pg and Insert EditingPicture Quality/Image Size Setting Loading a Memory CardTo Unload a Memory Card Tape Recording 16 EN To Adjust The Brightness Of The DisplayBasic Recording To Stop RecordingPower Switch Position Operation ModeVIDEO/MEMORY Switch Position Journalistic Shooting18 EN Slide the Power Zoom Lever towards TZoom Zoom OutSet Light OFF/AUTO/ON as required OFF Turns off the light To brighten the scene when natural lighting is too dim20 EN When a blank portion is recorded on a tapeTime Code Proper recordingNormal Playback To Control The Speaker VolumeConnections 22 ENIf using a VCR . . . go to step If not . . . go to step 24 EN To cancel Blank Search midwayBlank Search PressMemory Card Basic Shooting Snapshot 26 ENTo Protect Valuable Files Available only for SD Memory Card To Delete Unwanted Still ImagesTo Remove The Shutter Sound 28 EN Auto PlaybackStored image is displayed Index Playback Viewing File InformationRemoving On-Screen Display 30 EN Protect mode helps prevent the accidental erasure of filesProtecting Files To Remove ProtectionTo cancel deletion, select Return Deleting FilesDelete Screen 32 EN To Reset The SettingTo Print ALL Still Images ONE Print for Each Dpof ScreenTo Reset The No. Of Prints To Print by Selecting Still Images NO. of PrintsFast-Forward 3 Button Rewind Button Making a New Folder 34 ENInitializing a Memory Card Folder and File namesAdvanced Features 36 EN To Deactivate The Selected ModeNight-Alive Program AE With Special EffectsSports Variable Shutter Speed 1/250 1/4000 Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots 38 EN Set the VIDEO/MEMORY Switch to VideoFade/Wipe Effects To Deactivate The Selected EffectMenu Effect Fader And Wipe Menu40 EN Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo obtain correct focus While focusing on a nearer subjectFocus detection zone Subject42 EN Exposure ControlIris Lock White Balance Adjustment Manual White Balance OperationTo Return To Automatic White Balance For Recording Menu 44 ENSee pg If you have selected Camera MANUAL, SYSTEM, Display or DSCMenu Screen Explanations Factory-preset10X 40XAppears. The quality 46 ENSound will change. This is normal Recording. Also to activate the shutter sound effect  pgAfter the Power Switch is set to Auto or Manual When the Menu Screen is closed after Demo Mode is turned onSwitch is set to Auto or Manual Does not reset all settings to the factory-presetFollowing procedure applies to all except Synchro Comp  pg 48 ENFor Playback Menu Display Playback SoundDubbing To Or From a VCR 50 ENTo use this camcorder as a player Lock Button Display Menu Screen 52 ENPlay/Pause Button 4Knob Remote sensor Lock hole54 EN Normal playback Press T Remote sensor Zoom Buttons56 EN SET REMOTE/VCR CodeVCR Recording deck Connect the editing cable to the R.A.EDIT Connector Connect the editing cable to the Remote Pause connectorMake Connections Also refer to pg58 EN Select ScenesRemote sensor RM-V700U optional Editing Menu Automatic Editing to VCR60 EN Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingTo hear the dubbed sound during playback Insert Editing 62 ENUsing DV cable Using USB cablePower Switch Core filter To DV DV cable To USB64 EN Details 66 EN 10X optical zoom is selected Set Zoom to 40X or 700X Video  pgIf you want the lighting to look Set the VIDEO/MEMORY Switch to Memory This is normal Power Switch is set to Auto68 EN Rear of the LCD monitor is hot pg this can be avoided Cleaning The Camcorder 70 ENAfter Use To prevent damage and prolong service life When using the AC Adapter in areas other than the USAUse only the following batteries AAA R03 size x To avoid hazards72 EN Serious malfunctioning About moisture condensationDeclaration of Conformity Model Number Trade Name74 EN Storage media Power requirement A. and CanadaCompression system File size76 EN Index Controls, Connectors And IndicatorsSpeaker Volume Control VOL  pg Battery Release ButtonPower Switch VIDEO/MEMORY SwitchDisplays the selected Fade/Wipe effect  pg 1024# @ 80 EN LCD Monitor/Viewfinder Indications During Tape PlaybackBlank Search Indications 82 EN  pg , 9 Backlight CompensationChannels Left/Right Darken The LCD MonitorUnload a Tape White BalanceSee previous page as well
Top Page Image Contents