JVC GR-DVL822U specifications If using a VCR . . . go to step If not . . . go to step

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration (
pg. 22).

If using a VCR . . . go to step 3.

If not . . . go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (
pg. 48).

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 48).

• Playback Sound Mode, Tape Speed And Tape Running Displays for tape playback

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the

Menu Screen (
pg. 48).

EN 23

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack (
pg. 9).

●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “ AUTO ” or “ MANUAL ”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●If no image is displayed or no sound is heard from the

TV, set “S/AV INPUT” to “OFF” in the Menu Screen (
pg. 48).

●While the Audio/Video cable is connected to the AV connector, sound cannot be heard from the speaker.