JVC GR-DVL822U Using USB cable, Using DV cable, To USB, Power Switch Core filter To DV DV cable

Page 63

SYSTEM CONNECTIONS

EN 63

[A] Using USB cable

To USB	USB cable	To USB
	(provided)	connector

PC

[B] Using DV cable

OR

Power Switch

Core filter		Core filter
To DV	DV cable	To DV
IN/OUT	(optional)	connector

VIDEO/MEMORY

Switch (Open the LCD monitor to access this switch.)

PC with DV connector

Connection To A Personal Computer

[A] Using USB cable

This camcorder can transfer still images to a PC by using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

4 Turn the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “AC- CESSING FILES” is displayed on the LCD monitor since this can result in product damage.

Image 63

Contents GR-DVL822 It is recommended that you Dear CustomerImportant Product Safety Instructions Before recording an important scene MB Already inserted To the camcorder Camcorder USB Cable Video cableØ3.5 mini-plug to RCA plugWhile pressing down How To Attach The Lens CapAbout 3 minutes after the Power Switch is set to Set the Power Switch toGetting Started To Detach The Battery Pack PowerCharging the Battery Pack Battery pack Charging timeApproximate recording time Using the Battery PackUsing AC Power About BatteriesShoulder Strap Attachment Grip AdjustmentViewfinder Adjustment 10 ENDate/Time Settings MENU/BRIGHT Wheel Power LampLock Button Display Approximate recording time Tape Recording mode 12 ENLoading/Unloading a Cassette Audio Dubbing pg and Insert Editing Recording Mode SettingSet the tape recording mode depending on your preference SP modePicture Quality/Image Size Setting Loading a Memory CardTo Unload a Memory Card Tape Recording To Stop Recording To Adjust The Brightness Of The Display16 EN Basic RecordingJournalistic Shooting Operation ModePower Switch Position VIDEO/MEMORY Switch PositionZoom Out Slide the Power Zoom Lever towards T18 EN ZoomSet Light OFF/AUTO/ON as required OFF Turns off the light To brighten the scene when natural lighting is too dimProper recording When a blank portion is recorded on a tape20 EN Time CodeNormal Playback To Control The Speaker VolumeConnections 22 ENIf using a VCR . . . go to step If not . . . go to step Press To cancel Blank Search midway24 EN Blank SearchMemory Card Basic Shooting Snapshot 26 ENTo Protect Valuable Files Available only for SD Memory Card To Delete Unwanted Still ImagesTo Remove The Shutter Sound 28 EN Auto PlaybackStored image is displayed Index Playback Viewing File InformationRemoving On-Screen Display To Remove Protection Protect mode helps prevent the accidental erasure of files30 EN Protecting FilesTo cancel deletion, select Return Deleting FilesDelete Screen Dpof Screen To Reset The Setting32 EN To Print ALL Still Images ONE Print for EachTo Reset The No. Of Prints To Print by Selecting Still Images NO. of PrintsFast-Forward 3 Button Rewind Button Folder and File names 34 ENMaking a New Folder Initializing a Memory CardAdvanced Features Program AE With Special Effects To Deactivate The Selected Mode36 EN Night-AliveSports Variable Shutter Speed 1/250 1/4000 Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots To Deactivate The Selected Effect Set the VIDEO/MEMORY Switch to Video38 EN Fade/Wipe EffectsMenu Effect Fader And Wipe MenuSnapshot Recording Snapshot Mode Selection40 EN Snapshot For Tape RecordingSubject While focusing on a nearer subjectTo obtain correct focus Focus detection zone42 EN Exposure ControlIris Lock White Balance Adjustment Manual White Balance OperationTo Return To Automatic White Balance If you have selected Camera MANUAL, SYSTEM, Display or DSC 44 ENFor Recording Menu See pg40X Factory-presetMenu Screen Explanations 10XRecording. Also to activate the shutter sound effect pg 46 ENAppears. The quality Sound will change. This is normalDoes not reset all settings to the factory-preset When the Menu Screen is closed after Demo Mode is turned onAfter the Power Switch is set to Auto or Manual Switch is set to Auto or ManualFollowing procedure applies to all except Synchro Comp pg 48 ENFor Playback Menu Display Playback SoundDubbing To Or From a VCR 50 ENTo use this camcorder as a player Button 4 52 ENLock Button Display Menu Screen Play/PauseKnob Remote sensor Lock hole54 EN Normal playback Press T Remote sensor Zoom Buttons56 EN SET REMOTE/VCR CodeVCR Recording deck Also refer to pg Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT Connector Make Connections58 EN Select ScenesRemote sensor RM-V700U optional Editing Menu Automatic Editing to VCRDiagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER Timing60 EN For More Accurate EditingSet 12BIT Mode to Sound 2 or MIX Menu Screen pg Audio DubbingTo hear the dubbed sound during playback Insert Editing 62 ENTo USB Using USB cableUsing DV cable Power Switch Core filter To DV DV cable64 EN Details 66 EN 10X optical zoom is selected Set Zoom to 40X or 700X Video pgIf you want the lighting to look Rear of the LCD monitor is hot This is normal Power Switch is set to AutoSet the VIDEO/MEMORY Switch to Memory 68 EN pg this can be avoided Cleaning The Camcorder 70 ENAfter Use To avoid hazards When using the AC Adapter in areas other than the USATo prevent damage and prolong service life Use only the following batteries AAA R03 size x72 EN Trade Name About moisture condensationSerious malfunctioning Declaration of Conformity Model Number74 EN File size Power requirement A. and CanadaStorage media Compression system76 EN Index Controls, Connectors And IndicatorsVIDEO/MEMORY Switch Battery Release ButtonSpeaker Volume Control VOL pg Power SwitchDisplays the selected Fade/Wipe effect pg 1024# @ 80 EN LCD Monitor/Viewfinder Indications During Tape PlaybackBlank Search Indications 82 EN Darken The LCD Monitor Backlight Compensation pg , 9 Channels Left/RightUnload a Tape White BalanceSee previous page as well