JVC GR-DVL822U specifications 28 EN, Auto Playback, Stored image is displayed

Load a memory card (
pg. 14).

28 EN

Rewind Button (2)		Play/Pause Button
	(4/6)
Stop Button (5)		Fast-Forward Button
	(3)

MEMORY CARD PLAYBACK

Normal Playback

Images shot with the camcorder are automatically numbered, then stored in numerical order on the memory card. You can view the stored images, one at a time, much like flipping through a photo album.

1

2 Set the VIDEO/MEMORY Switch to “MEMORY”, then set the Power Switch to “PLAY” while pressing down the Lock Button.

• A stored image is displayed.

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

Lock Button

MANUAL

AUTO

OFF

PLAY

Power Switch

3 Press 3 to display the next image. Press 2 to display the previous image.

NOTE:

●Pressing INFO gives you details on the displayed image (
pg. 29, “Viewing File Information”).

●You can also overview several images at a time (
pg. 29, Index Playback).

●You can turn off the on-screen playback display (
pg. 29, “Removing On-Screen Display”).

[For Normal Playback] [For Auto Playback]

To display the next image

Display

FF

REW

Auto Playback

You can run through all the images stored in memory automatically.

1 Perform steps 1 and 2 above.

2 Press 4/6.

•If you press 2during Auto Playback, images are displayed in descending order.

•If you press 3during Auto Playback, images are displayed in ascending order.

3 To end Auto Playback, press 5.

NOTE:

●Even if you shoot a new image after playing back a low- numbered one, this will not overwrite an existing image, because new images are automatically stored after the last-recorded one.

●Images shot in a file size that is not compatible with this camcorder will be displayed as reduced-size thumbnail images. These thumbnail images cannot be transferred to a PC.

●Images shot with devices (such as JVC GR-DVM70) that are not compatible with DCF cannot be viewed with this camcorder; “UNSUPPORTED FILES” will be displayed.

To display the previous image