EN 31
MENU/BRIGHT Wheel
Power Switch
Lock Button
VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)
Display
Menu Screen
MENU
DELETE CURRENT
ALL
RETURN
Deleting Files
Previously stored files can be deleted either one at a time or all at once.
1 Load a memory card ( pg. 14).
2 Set the VIDEO/MEMORY Switch to “MEMORY”, then set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
• A stored image is displayed.
3 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select “DELETE”, then press it.
4 Rotate the MENU/BRIGHT wheel to select the desired mode.
CURRENT : Deletes the currently displayed image file.
ALL : Deletes all image files stored on the memory card.
5 Press the MENU/BRIGHT wheel in. The DELETE Screen appears.
•If you selected “CURRENT” in step 4, press 2 or 3to select the desired file.
6 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it.
•If the “
” mark appears, the selected file is protected and cannot be deleted ( pg. 30).
•To cancel deletion, select “RETURN”.
NOTES:
●Protected files ( pg. 30) cannot be deleted with the above operation. To delete them, remove protection first.
●Once files are deleted, they cannot be restored. Check files before deleting.
DELETE
DELETE Screen
DELETE?
EXECUTE
RETURN
CAUTION
Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialize it.
( pg. 34)