JVC LYT0244-001A, GR-DVF20 manual Playback Sound, Displaying the Date During Playback, EN43

EN43

Playback Sound

During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. (32 kHz is preset to “SOUND 1” and 48 kHz is preset to “FULL SOUND”.)

Recording sound	Display	Output sound
32 kHz	FULL SOUND
	SOUND 1	Stereo sound
	SOUND 2
48 kHz	FULL SOUND	Stereo sound
	SOUND 1	“L” sound is output on both channels
	SOUND 2	“R” sound is output on both channels

When watching a tape recorded at 32 kHz, if you want to change the output sound, access the Playback Menu and, in step 3 on page 42, select “32kHz MODE” and set it for “FULL SOUND”, “SOUND 1” or “SOUND 2”. When playing back a tape recorded at 48kHz, set in the same manner.

NOTES:

●You can also use the provided RM-V712U remote control’s AUDIO MONITOR button to change the output sound (without having to access the Playback Menu). Make sure you point the remote control at the camcorder’s remote sensor.

●During playback, the camcorder detects the sound mode in which the recording was made. This detection cannot be made during fast-forward or rewind. During playback the sound mode is displayed in the upper

left corner.

Display

				Minutes
				Seconds
				Frames*
	DEC	25	’ 98
TC 12 : 34 : 24	PM	5	: 30

*30 frames = 1 second

TIME CODE

(Displaying The Time Code During Playback)

You can display the Time Code on screen during playback. This is especially useful for editing. This function is preset to “OFF”. To turn it on, select “TIME CODE” at the Playback Menu and change the setting (☞ pg. 42).

ON– The Time Code is displayed on the playback screen. OFF– The Time Code does not appear.

PLAYBACK

TC 12 : 34 : 24	DEC	25	’ 98
	PM	5	: 30

DISPLAY

(Displaying the Date During Playback)

If the time has been set, the date is automatically recorded separately from the recorded video signal. You can display or remove the date anytime during playback. This function is preset to “ON”. To turn it off, select “DISPLAY” at the Playback Menu and change the setting (☞ pg. 42).

ON– The date is displayed on the playback screen. OFF– The date is not displayed.