JVC GR-DVF20 manual 56 EN, For More Accurate Editing, Diagnosing VCR’S Against Camcorder Timing

56EN

USINGTHEREMOTECONTROLUNIT(cont.)

For More Accurate Editing

Some VCRs make the transition from Record-Standby to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR.

Program 1

IN	OUT MODE
1 – – – – : – – ~
2	~
3	~
4	~
5	~
6	~
7	~
8	~
TIME CODE	– – : – –
TOTAL	0 0 : 0 0	Power Switch

Random Assemble

Editing Menu

DIAGNOSING VCR’S AGAINST

CAMCORDER TIMING

1 PREPARE FOR R.A. EDIT

Play back the tape in the camcorder, then point the remote control at the camcorder’s remote sensor and press R.A. EDIT ON/OFF.

•“Random Assemble Editing Menu” appears.

2 CHOOSE A SCENE

Perform Random Assemble Editing on Program 1 only. In order to check VCR and camcorder timing, select the beginning of a scene transition as your Edit- In point.

VCR

TV

(Recording deck)

3 PLAY BACK DUBBED SCENE

Remote sensor

•If any images from the scene prior to the transition you chose for your Edit-In point were recorded, that means your VCR moves quickly from Record-Pause to Record mode.

•If the scene you tried to dub starts in progress, the VCR is slow to start recording.

RM-V712U

T W (provided)

R.A.EDIT ON/OFF