JVC LYT0244-001A manual EN57, Adjustment of VCR’S Against Camcorder Timing, Input Correction Data

MENU Button

EN57

ADJUSTMENT OF VCR’S AGAINST

CAMCORDER TIMING

4 ACCESS PLAYBACK MENU

Point the remote control at the camcorder’s remote sensor and press R.A. EDIT ON/OFF to make the Random Assemble Editing menu disappear, then press MENU. The Playback Menu appears.

5 SELECT FUNCTION

Move the highlight bar to “SYNCHRO” by rotating the Select Dial, then press it. The value for “SYNCHRO” is highlighted.

6 INPUT CORRECTION DATA

Based on the diagnostics performed (☞ pg. 56), you can now increase the VCR’s speed by rotating the Select Dial upward. You can also slow down the VCR’s speed by rotating the Select Dial downward. The adjustment range is from –1.3 to +1.3 seconds, in 0.1-second increments.

Select Dial

Display

	48kHz MODE	FULL SOUND
	32kHz MODE	SOUND1
4	SYNCHRO	0 . 0
	DISPLAY	ON
	TIMECODE	OFF

Power Switch

Playback Menu

7 CLOSE MENU

Press the Select Dial twice.

•Now perform Random Assemble Editing beginning with step 3 on page 53.

NOTES:

● Before performing actual Random Assemble Editing, do

a few Random Assemble Editing trial runs to check

whether the value you have input is appropriate or not,

END

48kHz MODE	FULL SOUND
32kHz MODE	SOUND1
4SYNCHRO	0 . 0
DISPLAY	ON
TIMECODE	OFF
END

and make adjustments accordingly.

● Depending on the recorder, there may be situations

where the timing difference cannot be fully corrected.

TV

VCR

(Recording deck)