JVC GR-DVF20, LYT0244-001A manual 46 EN, Tape Dubbing

46EN

TAPEDUBBING

PLAY/PAUSE (4/6) Button

Power Switch

Connector cover*

To	White to
S-VIDEO
	Audio
OUT
	Output L

Audio cable (optional)

S-Video cable (provided)

Connector cover*

Red to

Audio

Output R

To Video

Output

Video cable (optional)

To VIDEO IN

Tape Dubbing

1 CONNECT EQUIPMENT Following the illustration at left, connect the camcorder and the VCR. Also refer to pg. 44 and 45.

2 PREPARE FOR DUBBING

Set the camcorder’s Power Switch to “PLAY”, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 SELECT VCR MODE

Engage the VCR’s AUX and Record-Pause modes.

4 FIND EDIT-IN POINT

Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press PLAY/PAUSE (4/6) on the camcorder.

5 START EDITING

Press PLAY/PAUSE (4/6) on the camcorder and engage the VCR’s Record mode.

6 STOP EDITING TEMPORARILY Engage the VCR’s Record-Pause mode and press PLAY/PAUSE (4/6) on the camcorder.

7 EDIT MORE SEGMENTS

Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

White to	Red to
AUDIO L IN	AUDIO R IN

NOTES:

● You can use Playback Zoom (☞ pg. 50) or Playback

Special Effects (☞ pg. 51) in step 2.

● Before you start dubbing, make sure that the indications

To

S-VIDEO IN

VCR (Recording deck)

TV

do not appear on the connected TV. If they do appear

during dubbing, they are being recorded onto the new

tape.

To clear the Playback Sound Mode Display, press

DISPLAY on the RM-V712U remote control (provided).

● Select “DISPLAY” and “TIME CODE” from the Playback

Menu (☞ pg. 42) to show or hide the Date/Time and the

Time Code on the recording.

● To show or hide all indications, press DISPLAY on the

camcorder for longer than 1 second.

*When connecting the cables, open this cover.