28 EN | RECORDING Advanced Features (cont.) |
START/STOP Button
POWER Switch
Lock Button
Operation Switch
Self-Timer
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.
1 Set the Operation Switch to “ ” and set the POWER
Switch to “ ” while pressing down the Lock Button located on the switch, then pull out the viewfinder or open the LCD monitor fully.
•You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while self- recording with the viewfinder pushed back.
2 Press the MENU wheel. The Menu Screen appears.
SNAPSHOT Button MENU Wheel
Display
MANUAL MENU
1RE TURN |
| |
D I S | OF F | |
SE L F – T I MER |
| |
5S |
| ON |
T E L E MACRO |
| |
W I DE MODE |
| |
W I ND CUT |
|
Menu Screen
3 Rotate the MENU wheel to select “ ”, and press it.
4 Rotate the MENU wheel to select
5 To engage the
OR
Press SNAPSHOT. After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder
6 To end
NOTE:
If “BEEP/TALLY” is set to “OFF” ( pg. 25), the beep does not sound and the tally lamp does not light.
When START/STOP or SNAPSHOT is pressed, the tally lamp changes as shown:
Begins blinking | 4 Blinks quickly |
| starts soon) |
|
|
Turns off
4snapshot recording starts)
Stops blinking and stays on
4
4
After approx. 15 sec.