JVC GRDVM80U, GR-DVM80 specifications Second Recording, EN29

Rotate the MENU wheel to select “5S”, and press it. The Sub Menu appears.

Rotate the MENU wheel to select “5S”, and press it. •“5S MODE” appears.

START/STOP Button

MODE Dial

POWER Switch

Lock Button

Operation Switch

SNAPSHOT Button

MENU Wheel

Display

		MANUAL	MENU		Menu Screen
1RETURN
	D I S
	SE L F – T I MER
	5S		OF F
	TE L E MACRO			5S
W I DE MODE				AN I M.
W I ND CUT

EN29

5-Second Recording

Record a vacation or an important event in 5-second clips to keep the action moving. This function is available only for video recording.

1 Set the POWER Switch to “ ” while pressing down the Lock Button located on the switch and set the MODE Dial to “VIDEO” or “ ”, then set the Operation Switch to “ ”. Pull out the viewfinder fully or open the LCD monitor fully.

2 Press the MENU wheel. The Menu Screen appears.

3 Rotate the MENU wheel to select “ ”, and press it. “MANUAL MENU” appears.

4

5

6 Press START/STOP. The tally lamp lights and beep sounds to indicate the start of recording, and after 5 seconds the camcorder enters Record-Standby mode.

•Even if you press START/STOP again within 5 seconds after recording starts, Record-Standby mode is not engaged.

7 To exit the 5S mode, select “OFF” in step 5 or set the Operation Switch to “ ” or the POWER Switch to “OFF”.

To Take A Snapshot In The 5-Second Recording Mode . . .

.... instead of pressing START/STOP in step 6, select the

desired Snapshot mode in the Menu Screen, then press SNAPSHOT. The camcorder records a 5-second still (
pg. 18). When “5S” is set to “ANIM.” (
pg. 26) this function is not available.

NOTE:

When “5S” is set to “ANIM.” in the Menu Screen the 5-second recording mode is not available. Animation recording of a few frames only is taken instead

(
pg. 26).