JVC GRDVM80U, GR-DVM80 specifications EN61

						EN61
SYMPTOM	POSSIBLE CAUSES			CORRECTIVE ACTION
27. Images on the LCD monitor	27. • In places subject to low			27. • Adjust the brightness and
appear dark or whitish.	temperature, images become			angle of the LCD monitor
	dark due to the characteristics			( pg. 16, 17).
	of the LCD monitor. When
	this happens, the displayed
	colors differ from those that
	are actually recorded. This is
	not a defect of the camcorder.
	• When the LCD monitor's
	fluorescent light reaches the end
	of its service life, images on the
	LCD monitor become dark.
	Consult your nearest JVC dealer.
28. The rear of the LCD monitor	28. • The light used to illuminate			28. • Close the LCD monitor to turn
is hot.	the LCD monitor causes it to			it off or set the POWER
	become hot.			Switch to “OFF”, and let the
				unit cool down.
29. The indicators and the image	29. • This may occur when the			29.
color on the LCD monitor	surface or the edge of the LCD				————
are not clear.	monitor is pressed.
30. The LCD monitor or	30. • Certain Fade/Wipe effects,			30. • Re-read the sections covering
viewfinder indications blink.	certain modes of Program AE			Fade/Wipe effects, Program
	with special effects, “DIS” and			AE with special effects and
	other functions that cannot be			“DIS” ( pg. 26, 30 – 33).
	used together are selected at
	the same time.
31. Colored bright spots appear	31. • The LCD monitor and the			31.
all over the LCD monitor or	viewfinder are made with
the viewfinder.	high-precision technology.
	However, black spots or bright
	spots of light (red, green or
	blue) may appear constantly				————
	on the LCD monitor or the
	viewfinder. These spots are not
	recorded on the tape. This is
	not due to any defect of the
	unit. (Effective dots: more than
	99.99 %)
32. During recording, sound	32. • The optional headphones are			32. • Connect the optional
cannot be heard.	not connected to the			headphones to the headphone
	headphones connector.			connector ( pg. 64, 65).
	• The sound volume of the			• Adjust the sound volume
	headphones connector was			during playback ( pg. 36).
	not adjusted appropriately.
	The sound volume at this
	point is the same as the level
	it was adjusted to during
	playback.
33. Play, Rewind and Fast-	33. • The POWER Switch is not set			33. • Set the POWER Switch to
Forward functions do not	to “	PLAY/PC	”.	“	PLAY/PC	” ( pg. 36).
work.
34. The tape is moving, but	34. • Your TV has AV input			34. • Set the TV to the mode or
there is no picture.	terminals, but is not set to its			channel appropriate for video
	VIDEO mode.			playback ( pg. 40, 41).
	• The cassette holder cover is			• Close the cassette holder
	open.			cover ( pg. 12).

CONTINUED ON NEXT PAGE