JVC GRDVM80U, GR-DVM80 specifications EN63, Auto Shut Off

INDEX Docking Station EN63

46

5

1

2

3 0

7 8

9

1PC Connector [DIGITAL STILL] ............
pg. 42

2J Terminal/Edit Connector [JLIP (Joint Level Interface Protocol) (EDIT)] ....................
pg. 51

•Connect to a JLIP-compatible camcorder or VCR to control it from the computer using the provided Software.

NOTE:

Make sure that the camcorder is turned on while connecting the camcorder to a PC using the Docking Station’s JLIP connector. If the camcorder is turned off (because the POWER Switch is set to “OFF” or due to Auto Shut Off* etc.) while the JLIP program software is used, it will be impossi- ble to control the connected devices from the computer. In such a case, first try turning the camcorder on again, or unplug the JLIP connec- tion cable from the Docking Station’s JLIP connector. Then, initialize or run the software again.

*Auto Shut Off:

If 5 minutes elapse in the Record-Standby mode or in the Pause mode, the camcorder’s power shuts off automatically to conserve energy.

•Connect the editing cable when performing Random Assemble Editing ........
pg. 50 – 55.

3External Stereo Microphone Input

Connector [MIC]	pg. 56
4 Stud	pg. 40
5 Screw	pg. 40

6Multi Connector

The Docking Station can be connected with this camcorder through this connector. Never touch it with your hand or hit it with a hard object; if the pins are damaged, the connectors will become unusable due to contact failure.

7S-Video Output Connector

[S OUT]
pg. 40, 51

8Video Output Connector

[VIDEO]
pg. 40, 51

9Audio Output Connector

[AUDIO L/R]	pg. 40,	51
0 Screw Knob	pg.	40
To attach the camcorder, tighten this clockwise.