JVC GR-HD1 manual 12 EN, Power, Charging The Battery Pack, Using The Battery Pack, Information

Page 12

12 EN

Power

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

battery pack from the AC Power Adapter/Charger, then try charging again.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

●For other notes,  pg. 69.

Charging The Battery Pack

Battery pack

BN-V416U or

BN-V428U

To AC outlet

POWER indicator

AC Power Adapter/

Charger

CHARGE indicator DC OUT connector

1Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger.

2Plug the AC Power Adapter/Charger’s power cord into an AC outlet. The POWER indicator lights.

3Attach the battery pack with the YZ mark aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE indicator begins blinking to indicate charging has started.

4When the CHARGE indicator stops blinking but stays lit, charging is finished. Remove the battery pack.

5Unplug the AC Power Adapter/Charger’s power cord from the AC outlet.

Battery pack

Charging time

 

 

BN-V416U

Approx. 2 hr.

 

 

BN-V428U*

Approx. 3 hr. 20 min.

 

 

* Provided

 

NOTES:

●If the protective cap is attached to the battery pack, remove it first.

●If you connect the camcorder’s DC cord to the AC Power Adapter/Charger during battery charging, power is supplied to the camcorder and charging stops.

●Charging is not possible if the wrong type of battery is used.

●When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the

Using The Battery Pack

Power Switch

Arrow

Lock Button

BATT.RELEASE Switch

1With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount a.

2Slide up the battery pack until it locks in place b.

To detach the battery pack...

Slide the battery pack down slightly while sliding BATT. RELEASE to detach it.

NOTES:

●Recording time is reduced significantly under the following conditions:

•Zoom or Record-Standby mode is engaged repeatedly.

•The LCD monitor is used repeatedly.

•The playback mode is engaged repeatedly.

●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

INFORMATION:

The optional extended-use battery pack kit is a set composed of a battery pack and AC Power Adapter/ Charger:

VU-V840 KIT: BN-V840U battery pack & AA-V15U AC Power Adapter/Charger

VU-V856 KIT: BN-V856U battery pack & AA-V80U AC Power Adapter/Charger

Read the kit’s instruction manual before using. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect BN-V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents For Customer Use Model No Serial NoDear Customer It is recommended that you…Page Power Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories To avoid personal injury CleaningDamage Requiring Service Replacement PartsBefore recording an important scene… AC Power Adapter DC Cord Remote Control UnitCleaning Cassette Memory Card 8 MBHow To Detach/Attach The Lens Hood How To Attach The Lens CapTo detach To attachHow To Attach The Core Filter Procedure below is an example of winding cable onceTypes of core filters Size Cable Times to To attach the core filter to the component video cableHow To Attach The Strap How To Attach The HandleHow To Use The Audio Cable 10 ENContents Power Charging The Battery PackUsing The Battery Pack 12 ENUsing AC Power About BatteriesCause a fire or explosion For other notes,  pgGrip Adjustment While using the LCD monitorWhile using the viewfinder 14 ENViewfinder Adjustment Brightness Adjustment Of The DisplayOperation Mode Power-Linked Operation16 EN Date/Time Settings Built-in Clock’s Rechargeable Lithium BatteryRotate the Menu Wheel Approximate recording time Tape Recording mode 18 ENLoading a Cassette Unloading a Cassette To protect valuable recordings…Loading a Memory Card /Unloading a Memory Card To protect valuable files available only for SD Memory Card…20 EN Basic RecordingRecording Mode 22 EN Tape Remaining TimeZooming Journalistic ShootingTime code cannot be reset When a blank portion is recorded on a tapeTime Code Recording From The Middle Of a TapeTo control the speaker volume… 24 ENNormal Playback Still PlaybackShuttle Search Slow-Motion PlaybackPlayback Zoom Blank Search26 EN To Connect a Conventional TV or VCRNot required for connection If using a VCR, go to step If not, go to stepFor S-video or video connection For component video connection28 EN Basic Shooting D.S.C. SnapshotAuto Playback Of Images Normal Playback Of Images30 EN Index Playback Of FilesViewing File Information Protecting Files To Remove ProtectionTo protect the currently displayed file Card32 EN Deleting FilesTo delete the currently displayed file Memory card To delete all files stored in the memory cardResetting The File Name To cancel selectionTo Print All Still Images One Print For Each Folder and File namesTo Reset The Number Of Prints 34 ENInitializing a Memory Card To Print By Selecting Still Images And Number Of PrintsFor Video and D.S.C. Recording Menus For Video Playback MenusFor D.S.C. Playback Menus 36 EN Camera MenuSelf-Timer Maximum telephoto settingManual Menu Optical Image Stabilization38 EN System MenuDisplay Menu 40 EN DSC MenuPicture quality Image sizeVideo Menu 42 EN Self-Timer Set SELF-TIMER to on .  pgTo end Self-Timer recording, select OFF in step Press SnapshotMotor Drive Mode Press the Exposure Wheel in. Or, set the Power Switch to a44 EN Exposure ControlIris Lock Backlight CompensationTo return to automatic iris Control Manual Iris Adjustment Manual Shutter Speed AdjustmentTo return to automatic iris adjustment 46 ENTo reset to Auto Focus Manual FocusManual Zooming White Balance Adjustment Select Auto in . Or, set the Power Switch to a48 EN To return to automatic white balance…Manual White Balance Adjustment 50 EN Wipe Or Fader EffectsProgram AE SportsSpecial Effects To deactivate the selected effect52 EN Navigation FunctionBefore stops Press the Recording Start/Stop Button to stop recordingBe corrupted if the battery becomes exhausted Set the Playback Mode switch to VideoDuring deletion. If the memory card becomes Corrupted, initialize it54 EN To use this camcorder as a playerTo use this camcorder as a recorder Date/timeEquipped With An i.LINK Dubbing To Or From a Video Unit56 EN DV to DV dubbingMPEG2 to MPEG2 dubbing If an image recorded on the tape using DV Dubbing Still Images Recorded OnCard is not loaded, the message Copying Failed is displayedInstalling The Batteries 58 ENBeam Effective Area indoor use Buttons And FunctionsSlow-Motion Playback DV only Frame-By-Frame Playback DV onlyPlayback Zoom DV only 60 EN Audio Dubbing DV onlyPlayback Special Effects DV only To hear the sound during Audio DubbingDuring Insert Editing, set the Recording Mode Switch to DV Insert Editing DV onlyVCR Code List VCR Brand Name 62 ENRandom Assemble Editing R.A.Edit DV only Set Remote/VCR CodeMake Connections 64 EN Select ScenesAutomatic Editing To VCR Engage the Stop modes for the camcorder and the VCRAdjustment Of VCR/Camcorder Timing 66 ENFor More Accurate Editing Diagnosing VCR/Camcorder TimingUsing USB cable Using i.LINK cableUsing USB cable Using i.LINK cable68 EN WebCamThis camcorder can be used as a WebCam via USB connection You can also use the camcorder for videoItems Power Symptom Possible Causes Corrective Action70 EN Video and D.S.C. RecordingVideo and D.S.C. Playback Advanced features 72 ENPress Back Light Other problems Camcorder When the LCD monitor’sIs discharged Clean the viewfinder, please 74 ENOr Both Consult your nearest JVCAppears when no tape is loaded  pg Indications MeaningThan 1 hour until condensation disappears Compatible with this camcorder76 EN Size that is not compatible with this camcorder Protected SD Memory Card loadedIndication remains, consult your nearest JVC dealer Your nearest JVC dealerGeneral Battery Precautions Battery PacksUsing Household AC Plug Adapter 78 ENMemory Cards LCD MonitorMain Unit Do NOT…How To Handle a CD-ROM 80 ENAbout moisture condensation Serious malfunctioningCleaning The Camcorder After Use82 EN USB VTR84 EN Indicators ConnectorsControls Other Parts86 EN LCD Monitor/Viewfinder IndicationsDuring Video Recording Only During D.S.C. Recording OnlyDuring Video Playback 88 EN Wide Mode DV Wide Playback soundProgram AE Program AE Recording Time90 EN Page GR-HD1 Software Installation How to handle a CD-ROMCPU System Requirements  For copying still image files to a PC For creating a DVD Video CPU For holding a video conference over the Internet HardwareSoftware MiscellaneousSoftware Installation Installation begins Input your information in all boxes, and then click NextClick Finish Customer Information dialog box appearsOn the camcorder’s LCD monitor USB Mode appears ConnectionsUSB connection Connect the camcorder to the PC with a USB cableLink connection Driver Installation Hardware Update Wizard dialog box appearsDriver search dialog box appears Dialog box to select the manufacture and model appearsClick the next three items in the order below Click Next Click Continue AnywayBrowse Viewing the Contents of a Memory Card Copying Still Images to a PC Still Images PlaybackTo print a still image Disconnecting the USB Cable Select USB Mass Storage Device, and then click StopClick OK Camcorder turns offImporting MPEG-format Video Stream to a PC Make sure that the camcorder’s model name isDisplayed Click Import, and then click BrowseStart playback using control buttons You can view playback on the camcorder’s LCD monitorStart button Reinstalling the driver Reinstall the driver. pgClick the Hardware tab, and then click Device Manager Click OK Disconnect the i.LINK cable, and connect it againSelect the recording mode for best image recordings FormatUse the component video connector for viewing clear images Enregistrées en mode HD format MPEG2Appareils semblables Suite AU VersoPrécautions à observer pour la lecture Grabadas en el modo HD formato MPEG2 Imágenes de alta definiciónPrecauciones en cuanto a la reproducción English Details On HD Mode Image Français Détails sur les images en mode HDRemarque sur l’installation de Mpeg Edit StudioTM Pro LE Nota sobre la instalación Mpeg Edit StudioTM Pro LE

GR-HD1, 0503-FO-ID-VP, LYT1154-001C specifications

The JVC LYT1154-001C,0503-FO-ID-VP,GR-HD1 is an advanced high-definition camcorder that embodies cutting-edge technology and feature-rich design, catering to both professional videographers and hobbyists. Designed with a focus on versatility and performance, this model is part of JVC's strive towards delivering high-quality imagery and enhanced user experience.

One of the standout features of the GR-HD1 is its ability to record in HD resolutions, pushing the boundaries of video quality. It uses an advanced sensor that captures vibrant colors and intricate details, making it suitable for various shooting conditions, from bright daylight to low-light environments. The camcorder supports multiple recording formats, allowing users to choose the best one for their project needs.

In terms of connectivity, the LYT1154-001C boasts an array of options that make it easier to transfer footage to other devices, streamlining the editing process. It comes equipped with USB ports, FireWire outputs, and HDMI connectivity, ensuring compatibility with a wide range of computers, displays, and editing software. This versatility in connectivity plays a crucial role in modern video production workflows.

The ergonomic design of the GR-HD1 enhances usability, with an intuitive interface that facilitates quick access to settings and functions. The adjustable LCD screen allows for easy framing and playback, enabling users to capture the perfect shot from various angles. The user-friendly controls are thoughtfully placed for convenient operation, making it suitable for both novice and experienced users.

Another notable characteristic of the JVC LYT1154-001C,0503-FO-ID-VP,GR-HD1 is its image stabilization technology, which minimizes the effects of camera shake, providing smooth and professional-quality video. This feature is especially beneficial during handheld shooting or when navigating uneven terrain.

In summary, the JVC LYT1154-001C,0503-FO-ID-VP,GR-HD1 is a powerful and versatile camcorder that brings together high-definition recording, comprehensive connectivity, ergonomic design, and advanced stabilization technologies. Whether for professional projects or everyday filming, this camcorder promises to deliver an exceptional recording experience, making it a valuable tool for anyone looking to elevate their video production capabilities.
Top Page Image Contents