JVC LYT1154-001C, GR-HD1 manual Shuttle Search, Slow-Motion Playback, Playback Zoom, Blank Search

Page 25
BLANK SEARCH
PUSH "STOP" BUTTON
TO CANCEL

 

 

 

 

 

 

 

 

 

 

 

 

 

EN 25

Shuttle Search

NOTES:

 

 

 

 

 

 

 

 

 

 

 

 

 

● Before starting Blank Search, if the current position

Allows high-speed search in either direction during

is at a blank portion, the camcorder searches in

video playback.

the reverse direction. If the current position is at a

1) During playback, press 5 for forward search,

recorded portion, the camcorder searches in the

or 3 for reverse search.

forward direction.

2) To resume normal playback, press 4·9.

● Blank Search does not work if “HEAD CLEANING

● During playback, press and hold 5 or 3.

REQUIRED. USE CLEANING CASSETTE” has

The search continues as long as you hold the

appeared with the tape.

button. Once you release the button, normal

● If the beginning or end of the tape is reached

playback resumes.

during Blank Search, the camcorder stops

● A slight mosaic effect appears on the display

automatically.

during Shuttle Search. This is not a

● A blank portion which is shorter than 5 seconds of

malfunction.

tape may not be detected.

ATTENTION:

● The detected blank portion may be located

(DV mode only)

 

 

 

 

 

 

 

 

 

 

 

 

between recorded scenes. Before you start

During Shuttle Search, parts of

 

 

 

 

 

 

 

 

 

 

 

 

recording, make sure there is no recorded scene

 

 

 

 

 

 

 

after the blank portion.

the picture may not be clearly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

visible, particularly on the left

 

 

 

 

 

 

 

 

Slow-Motion Playback

 

 

 

 

side of the screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback Zoom

Blank Search

Playback Special Effects

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Helps you find where you should start recording in the middle of a tape to avoid time code interruption. ( pg. 23)

1Load a cassette. ( pg. 18)

2Set the Playback Mode Switch to “VIDEO”.

3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.

4During Stop mode, press BLANK

SEARCH.

● The “BLANK

SEARCH” indication appears and the camcorder automatically starts

reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

●To cancel Blank Search midway, press 8.

Available only with the remote control (provided). ( pg. 59)

VIDEO RECORDING & PLAYBACK

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model No Serial No For Customer UseIt is recommended that you… Dear CustomerPage Power Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning Accessories To avoid personal injuryDamage Requiring Service Replacement PartsBefore recording an important scene… Remote Control Unit AC Power Adapter DC CordCleaning Cassette Memory Card 8 MBHow To Attach The Lens Cap How To Detach/Attach The Lens HoodTo detach To attachProcedure below is an example of winding cable once How To Attach The Core FilterTypes of core filters Size Cable Times to To attach the core filter to the component video cableHow To Attach The Handle How To Attach The StrapHow To Use The Audio Cable 10 ENContents Charging The Battery Pack PowerUsing The Battery Pack 12 ENAbout Batteries Using AC PowerCause a fire or explosion For other notes,  pgWhile using the LCD monitor Grip AdjustmentWhile using the viewfinder 14 ENBrightness Adjustment Of The Display Viewfinder AdjustmentPower-Linked Operation Operation Mode16 EN Built-in Clock’s Rechargeable Lithium Battery Date/Time SettingsRotate the Menu Wheel 18 EN Approximate recording time Tape Recording modeLoading a Cassette Unloading a Cassette To protect valuable recordings…To protect valuable files available only for SD Memory Card… Loading a Memory Card /Unloading a Memory CardBasic Recording 20 ENRecording Mode Tape Remaining Time 22 ENZooming Journalistic ShootingWhen a blank portion is recorded on a tape Time code cannot be resetTime Code Recording From The Middle Of a Tape24 EN To control the speaker volume…Normal Playback Still PlaybackSlow-Motion Playback Shuttle SearchPlayback Zoom Blank SearchTo Connect a Conventional TV or VCR 26 ENNot required for connection If not, go to step If using a VCR, go to stepFor S-video or video connection For component video connectionBasic Shooting D.S.C. Snapshot 28 ENNormal Playback Of Images Auto Playback Of ImagesIndex Playback Of Files 30 ENViewing File Information To Remove Protection Protecting FilesTo protect the currently displayed file CardDeleting Files 32 ENTo delete the currently displayed file Memory card To delete all files stored in the memory cardTo cancel selection Resetting The File NameTo Print All Still Images One Print For Each Folder and File names34 EN To Reset The Number Of PrintsInitializing a Memory Card To Print By Selecting Still Images And Number Of PrintsFor Video Playback Menus For Video and D.S.C. Recording MenusFor D.S.C. Playback Menus Camera Menu 36 ENMaximum telephoto setting Self-TimerManual Menu Optical Image StabilizationSystem Menu 38 ENDisplay Menu DSC Menu 40 ENPicture quality Image sizeVideo Menu 42 EN Set SELF-TIMER to on .  pg Self-TimerTo end Self-Timer recording, select OFF in step Press SnapshotPress the Exposure Wheel in. Or, set the Power Switch to a Motor Drive Mode44 EN Exposure ControlBacklight Compensation Iris LockTo return to automatic iris Control Manual Shutter Speed Adjustment Manual Iris AdjustmentTo return to automatic iris adjustment 46 ENManual Focus To reset to Auto FocusManual Zooming Select Auto in . Or, set the Power Switch to a White Balance Adjustment48 EN To return to automatic white balance…Manual White Balance Adjustment Wipe Or Fader Effects 50 ENProgram AE SportsTo deactivate the selected effect Special EffectsNavigation Function 52 ENBefore stops Press the Recording Start/Stop Button to stop recordingSet the Playback Mode switch to Video Be corrupted if the battery becomes exhaustedDuring deletion. If the memory card becomes Corrupted, initialize itTo use this camcorder as a player 54 ENTo use this camcorder as a recorder Date/timeDubbing To Or From a Video Unit Equipped With An i.LINKDV to DV dubbing 56 ENMPEG2 to MPEG2 dubbing Dubbing Still Images Recorded On If an image recorded on the tape using DVCard is not loaded, the message Copying Failed is displayed58 EN Installing The BatteriesBeam Effective Area indoor use Buttons And FunctionsFrame-By-Frame Playback DV only Slow-Motion Playback DV onlyPlayback Zoom DV only Audio Dubbing DV only 60 ENPlayback Special Effects DV only To hear the sound during Audio DubbingInsert Editing DV only During Insert Editing, set the Recording Mode Switch to DV62 EN VCR Code List VCR Brand NameRandom Assemble Editing R.A.Edit DV only Set Remote/VCR CodeMake Connections Select Scenes 64 ENEngage the Stop modes for the camcorder and the VCR Automatic Editing To VCR66 EN Adjustment Of VCR/Camcorder TimingFor More Accurate Editing Diagnosing VCR/Camcorder TimingUsing i.LINK cable Using USB cableUsing USB cable Using i.LINK cableWebCam 68 ENThis camcorder can be used as a WebCam via USB connection You can also use the camcorder for videoItems Symptom Possible Causes Corrective Action Power70 EN Video and D.S.C. RecordingVideo and D.S.C. Playback 72 EN Advanced featuresPress Back Light Camcorder When the LCD monitor’s Other problemsIs discharged 74 EN Clean the viewfinder, pleaseOr Both Consult your nearest JVCIndications Meaning Appears when no tape is loaded  pgThan 1 hour until condensation disappears Compatible with this camcorder76 EN Protected SD Memory Card loaded Size that is not compatible with this camcorderIndication remains, consult your nearest JVC dealer Your nearest JVC dealerBattery Packs General Battery PrecautionsUsing Household AC Plug Adapter 78 ENLCD Monitor Memory CardsMain Unit Do NOT…80 EN How To Handle a CD-ROMAbout moisture condensation Serious malfunctioningAfter Use Cleaning The Camcorder82 EN VTR USB84 EN Connectors IndicatorsControls Other PartsLCD Monitor/Viewfinder Indications 86 ENDuring Video Recording Only During D.S.C. Recording OnlyDuring Video Playback 88 EN Playback sound Wide Mode DV WideProgram AE Program AE Recording Time90 EN Page GR-HD1 How to handle a CD-ROM Software InstallationCPU  For copying still image files to a PC System Requirements For creating a DVD Video CPUHardware  For holding a video conference over the InternetSoftware MiscellaneousSoftware Installation Input your information in all boxes, and then click Next Installation beginsClick Finish Customer Information dialog box appearsConnections On the camcorder’s LCD monitor USB Mode appearsUSB connection Connect the camcorder to the PC with a USB cableLink connection Hardware Update Wizard dialog box appears Driver InstallationDriver search dialog box appears Dialog box to select the manufacture and model appearsClick Next Click Continue Anyway Click the next three items in the order belowBrowse Viewing the Contents of a Memory Card Still Images Playback Copying Still Images to a PCTo print a still image Select USB Mass Storage Device, and then click Stop Disconnecting the USB CableClick OK Camcorder turns offMake sure that the camcorder’s model name is Importing MPEG-format Video Stream to a PCDisplayed Click Import, and then click BrowseYou can view playback on the camcorder’s LCD monitor Start playback using control buttonsStart button Reinstall the driver. pg Reinstalling the driverClick the Hardware tab, and then click Device Manager Click OK Disconnect the i.LINK cable, and connect it againFormat Select the recording mode for best image recordingsEnregistrées en mode HD format MPEG2 Use the component video connector for viewing clear imagesAppareils semblables Suite AU VersoPrécautions à observer pour la lecture Imágenes de alta definición Grabadas en el modo HD formato MPEG2Precauciones en cuanto a la reproducción Français Détails sur les images en mode HD English Details On HD Mode ImageNota sobre la instalación Mpeg Edit StudioTM Pro LE Remarque sur l’installation de Mpeg Edit StudioTM Pro LE

GR-HD1, 0503-FO-ID-VP, LYT1154-001C specifications

The JVC LYT1154-001C,0503-FO-ID-VP,GR-HD1 is an advanced high-definition camcorder that embodies cutting-edge technology and feature-rich design, catering to both professional videographers and hobbyists. Designed with a focus on versatility and performance, this model is part of JVC's strive towards delivering high-quality imagery and enhanced user experience.

One of the standout features of the GR-HD1 is its ability to record in HD resolutions, pushing the boundaries of video quality. It uses an advanced sensor that captures vibrant colors and intricate details, making it suitable for various shooting conditions, from bright daylight to low-light environments. The camcorder supports multiple recording formats, allowing users to choose the best one for their project needs.

In terms of connectivity, the LYT1154-001C boasts an array of options that make it easier to transfer footage to other devices, streamlining the editing process. It comes equipped with USB ports, FireWire outputs, and HDMI connectivity, ensuring compatibility with a wide range of computers, displays, and editing software. This versatility in connectivity plays a crucial role in modern video production workflows.

The ergonomic design of the GR-HD1 enhances usability, with an intuitive interface that facilitates quick access to settings and functions. The adjustable LCD screen allows for easy framing and playback, enabling users to capture the perfect shot from various angles. The user-friendly controls are thoughtfully placed for convenient operation, making it suitable for both novice and experienced users.

Another notable characteristic of the JVC LYT1154-001C,0503-FO-ID-VP,GR-HD1 is its image stabilization technology, which minimizes the effects of camera shake, providing smooth and professional-quality video. This feature is especially beneficial during handheld shooting or when navigating uneven terrain.

In summary, the JVC LYT1154-001C,0503-FO-ID-VP,GR-HD1 is a powerful and versatile camcorder that brings together high-definition recording, comprehensive connectivity, ergonomic design, and advanced stabilization technologies. Whether for professional projects or everyday filming, this camcorder promises to deliver an exceptional recording experience, making it a valuable tool for anyone looking to elevate their video production capabilities.
Top Page Image Contents