JVC 0503-FO-ID-VP, GR-HD1, LYT1154-001C manual Manual Focus, Manual Zooming, To reset to Auto Focus

EN 47

Lock Button

Power Switch

Zoom Ring

Manual Focus

Ring

FOCUS Button

Manual Focus

NOTE:

If you are using the viewfinder, you should already have performed “Viewfinder Adjustment”

( pg. 15).

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Press FOCUS. The manual focus indicator appears.

3To focus on a further subject, rotate the Manual Focus Ring counterclockwise.

While focusing on a further subject

To focus on a nearer subject, rotate the Manual Focus Ring clockwise.

While focusing on a nearer subject

To reset to Auto Focus...

Press FOCUS or set the Power Switch to “A”.

NOTES:

●Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.

●When the focus level cannot be adjusted any

further or closer, “ ” or “ ” will blink.

Manual Zooming

Zooming manually using the Zoom Ring enables controlling the shooting angle or zooming speed to your preference.

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Zoom In

Rotate the Zoom Ring counterclockwise.

Zoom Out

Rotate the Zoom Ring clockwise.

NOTE:

Digital zoom cannot be used when the Recording Mode Switch is set to “HD” or “MEMORY”.

( pg. 16)

ADVANCED FEATURES