JVC 0503-FO-ID-VP, GR-HD1, LYT1154-001C manual 50 EN, Wipe Or Fader Effects, Program AE, Sports

FEATURES FOR RECORDING (cont.)

50 EN

Wipe Or Fader Effects

Wipe/Fader effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next.

Wipe or Fader works when video recording is started or stopped.

Lock Button

Power Switch

P.AE Button

FADE/WIPE Button

MENU Wheel

EFFECT Button

There are 9 types of Fader/Wipe Effects for scene transition.

FADER–WHITE: Fade in or out with a white screen.

FADER–BLACK: Fade in or out with a black screen.

FADER–B.W: Fade in to a color screen from a black and white screen, or fade out from color to black and white.

WIPE – CORNER: Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen.

WIPE – WINDOW: The scene starts in the center of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the center.

WIPE – SLIDE: Wipe in from right to left, or wipe out from left to right.

WIPE – DOOR: Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.

WIPE – SCROLL: The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen.

WIPE – SHUTTER: Wipe in from the center of a black screen toward the top and bottom, or wipe out from the top and bottom toward the center leaving a black screen.

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

3Press FADE/WIPE. The WIPE/FADER screen appears.

4To activate the Fade-in or Wipe-in:

Rotate the MENU Wheel to select the desired effect and press it during Record-Standby mode.

●The selected effect indicator appears.

To activate the Fade-out or Wipe-out:

Rotate the MENU Wheel to select the desired effect and press it during recording.

●The selected effect indicator appears.

5Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect…

Select “OFF” in step 4. Or, set the Power Switch to “A”.

NOTES:

●You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button.

●Wipe Effects is not activated when the recording mode is set to “HD”.

IMPORTANT:

Some Wipe/Fader Effects cannot be used with certain modes of Program AE or Special Effects. If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out.

Program AE

Program AE allows you to shoot images according to various situations.

SPORTS

(Variable Shutter Speed: 1/250 – 1/1000) This setting allows fast-moving images to be captured one frame at a time, for vivid, stable slow- motion playback. The faster the shutter speed, the darker the picture becomes. Use the shutter function under good lighting conditions.

SNOW: Compensates for subjects that may otherwise appear too dark when shooting in extremely bright surroundings such as in the snow.

SPOTLIGHT: Compensates for subjects that may otherwise appear too bright when shooting under extremely strong direct lighting such as spotlights.

NOTE:

“SPOTLIGHT” has the same effect as –3 with the exposure control. ( pg. 44)