JVC 0503-FO-ID-VP, GR-HD1 manual Date/Time Settings, Built-in Clock’s Rechargeable Lithium Battery

CAMERA REC MODE –

DV SOUND – 1 2 b i t

ZOOM – 4 0 x

GA I N UP – AGC NAV I GAT I ON– MANUAL

EN 17

Date/Time Settings

The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. ( pg. 35, 42)

Lock Button

Power Switch

MENU Wheel

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

3 Press the MENU Wheel in. The Menu Screen appears.

Built-in Clock’s Rechargeable Lithium Battery

To store the date/time in memory, the clock’s rechargeable lithium battery is integrated in the camcorder. While the camcorder is connected to an AC outlet using the AC Power Adapter/Charger, or while the battery pack attached to the camcorder continues to supply power, the clock’s rechargeable lithium battery is always charged. However, if the camcorder is not used for approx. 3 months, the clock’s lithium battery will become discharged and the date/time stored in memory will be lost. When this occurs, first connect the camcorder to an AC outlet using the AC Power Adapter/Charger for over 24 hours to charge the clock’s rechargeable lithium battery. Then perform the date/time setting before using the camcorder.

Note that the camcorder can be used without setting the date/time.

NOTE:

Even if you select “CLOCK ADJ.”, if the parameter is not highlighted, the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/time parameter (month), the clock stops. When you finish setting the minute and press the MENU Wheel in, the date and time begin operation from the date and time you have just set.

GETTING STARTED

4Rotate the MENU Wheel to select “n”, and press it. The CAMERA DISPLAY Menu appears.

RETURN

CAMERA DISPLAY

BR I GHT
ON SCREEN	–	LCD / T V
DATE / T I ME	–	AUTO
T I ME CODE	–	OFF
CLOCK		DEC 2	5'0 3
ADJ .		5 : 3	0 PM

5Rotate the MENU Wheel

to select “CLOCK ADJ.”, RETURN

and press it. The

parameter for “Month” is highlighted.

6Rotate the MENU Wheel to input the month, and press it. Repeat to input the day, year, hour and minute.

CAMERA DISPLAY
	DEC 2	5'0 3
CLOCK
ADJ .	5 : 3	0 PM

7 Rotate the MENU Wheel to select “BRETURN”, and

press it twice. The Menu Screen closes.