JVC GY-DV550U instruction manual Indication Indication Contents

2. CONTROLS, INDICATORS AND CONNECTORS

2-10 Indications in Viewfinder (Cont'd)

●Status 1

In addition to the information on the Status 0 screen, this screen displays audio indicators and information on remaining tape, voltage and lens F-number (or FILTER POSITION).

Display position	Display	Function
8	(Example)	Shows the input level of the audio input channel.
	CH1- - - - + - -	Display ON/OFF can be selected using the VF DISPLAY menu screen.
	CH2- - - - + - -	☞ See "AUDIO DISPLAY" on page 78.
9	STBY	VCR in standby mode
				Note:
	SAVE	VCR in save mode
			When the RS-232C cable
	STOP	VCR in stop mode
	REC	VCR in record mode	is connected, the VCR
	FF	VCR in fast-forward mode	operation mode may not
	REW	VCR in rewind mode	be displayed correctly.
	EJECT	VCR in eject mode
0	(Example)	Remaining tape indication (displayed in 1-minute steps)
	< 60
		When the tape is used for a long time, the remaining tape may not be
	(Example)	indicated accurately. At the beginning of the tape, in particular, the indication
	12: 34: 56: 20	may show smaller value than the actual one.
		Time code display
		Time code display is available when the "REC TIME" item on the VF DISPLAY
		menu screen is set to TIME CODE.
		☞ See "REC TIME" on page 78.
A	(Example)	Voltage indication (displayed in 0.1 V steps) The indicator flashes when the
	12.4V	battery is low. The indicator will not appear when the camera remote control
		unit is connected.
B	F-number:	The F-number of the connected lens or the filter position of the unit is displayed.
	OPEN, F2, F2.8, F4,	Whether to display the F-number or filter position, or no display is selected in
	F5.6, F8, F11, F16,	F. NO/FILTER of the VF DISPLAY screen.
	CLOSE	• The F-number may not be displayed depending on the lens type or when
	FILTER:	the lens is removed. ☞ See page 78
	FIL1, FIL2, FIL3	Not displayed during external video signal input or IEEE1394 input.
C	(Example)	In the Super Scene Finder (S.S.F.) mode, the number of memorized scenes
	M: 099	is shown.
		M : In MARK mode
		C : In CUE mode
		Number: Number of memorized scenes
D	EXT, INT, PARA	Displays whether the main unit is used for recording or the external VCR
		connected to the VTR/RM multi-pin connector.
		The displays will differ depending on the VTR SELECT switch setting.
		INT is constantly displayed during external video input or IEEE1394 input.
		INT is constantly displayed when the VTR/RM switch is set to RM.
E	REC2	The display will light during external VCR recording.
		The display flashes when there is a warning on the external VCR.
		The display will not appear when the VTR/RM switch is set to RM.

●Status 2 ... Not displayed during external video signal input or IEEE1394 input.

This screen displays the camera setup statuses.

Event display is not available while this screen is displayed.

Indication	Indication Contents
SCENE FILE	A, B, OFF
WHITE BAL	A, B, PRESET, FAW, MANUAL (When remote control unit w/manual balance is connected.)
FILTER	3.2K, 5.6K+1/8ND, 5.6K+1/64ND
SHUTTER	OFF, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/60.1 to 1/2084.6 (in VARIABLE mode),
	EEI (in ALC mode)
GAIN	-3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 18dB, LOLUX, ALC
IRIS LEVEL	NORMAL, BACK L, SPOT L
FULL AUTO	ON, OFF
REC TIME	Remaining tape time or time code.

29