JVC GY-DV550U instruction manual Using AN ANTON-BAUER Battery Pack, Attaching the Battery Pack

Page 39

4. POWER SUPPLY

4-2 Battery Pack Operation (Cont'd)

USING AN ANTON-BAUER BATTERY PACK

To use an Anton-Bauer battery pack (Propack 13/14, Trimpack 13/14, Magnum 13/14, Compack 13/14 Series), it is necessary to detach the battery case from the GY-DV550 and replace it with the Anton-Bauer battery holder. Use the following battery holder.

•Battery holder: Anton-Bauer QRQ27

Detaching the Battery Case From the GY-DV550 and Attaching The Anton-Bauer Battery

2.

1. Black screw A

1. Remove the two black screws A on the battery case.

2. Remove the lower half of the battery case cover in the downward direction.

3. Mount screw B 3. Connector

3. Mount screw

B

3. To remove the battery case, remove the four screws Bfixing the battery case and the connector connecting the battery case to this unit.

Connector

Compartment

5.

5.4.

Anton-Bauer

Battery holder

4. Connect the connectors protruding from the GY-DV550 with the connectors on the battery holder.

*Following connection of the connectors, insert them into the connector compartment.

5.Secure the battery holder to the GY-DV550 with the four mount screws provided with the battery holder.

*Take care not to pinch the wires. This could result in damage.

Attaching and Detaching an Anton-Bauer Battery Pack

	Guide pins
	Cassette cover
	side panel	Battery
	Guide holes	pack
Release	(x3)	(Trimpack)
lever

Release lever

LIGHT		MODE
ON		MODE
OFF		RM
OFF		VTR
COUNTER		INCOM
CTL		MIC
TC	CARBON
UB	DYNAMIC
	INCOM
	MIC	LEVEL
	ON	LEVEL
CH-1CH-2
FRONT
REAR
AUDIO INPUT	OFF
Side panel	CALL
Side panel	RM	OFF	/BATT.
	RM	OFF	DC IN
with display		POWER

Battery

Attaching the Battery Pack

1. Align the 3 guide pins of the battery pack with the guide holes on the battery holder, and push straight to insert the battery pack.

The battery cannot be attached properly if the guide pins are not inserted straight.

2. Slide the battery pack toward the side panel where the cassette cover is located until it clicks. Now the battery pack has been attached.

Detaching the Battery Pack

While pushing and holding the release lever, slide the battery pack toward the side panel where the LCD display is located, then pull the battery pack outward to remove.

39

Image 39

Contents SC96999-002 For Customer UseImportant Safeguards Information RemarqueRating plate serial number plate is on the top frame Main Features 10. S.S.F. Super Scene Finder Function Main FeaturesCamera Settings Playback Procedure Fast-Forward, Rewind SearchIntroduction Main Unit ConfigurationPrecautions for Proper Use Routine and Periodical Maintenance Precautions for Use of Head Cleaning TapeTime management Condensation Battery Pack to be UsedCharacteristic CCD Phenomena Videocassette to be UsedFront Section CONTROLS, Indicators and ConnectorsLens mounting ring/Lens lock lever Filter Color temperature conversion filter control knobFront Section Cont’d Take buttonRight Side Section Right Side Section Cont’d Right Side Section Contd VCR Setting SectionTime Code Generator setting switches VCR Display Section Section for time code related indications # Tape transport direction indicators$ Remaining Battery Power Display Counter displayLeft Side Section Top Section Adapter Section Prompter Output prompter output connector VTR/RM VTR/RM multi-pin connector 26PRear Section Rear Section Contd Counter Display Contents S14 x 7.3B12 Lens optionalVF-P115B 1.5-Inch Viewfinder optionalViewfinder Screen Display Batt battery lampREC/ALARM lamp Indications in ViewfinderDisplay Position Function Switch Event Display ContentsIndications in Viewfinder Contd StatusIndication Indication Contents Time/Date Display Alarm Message Display Auto White Balance Display Safety Zone Setting the Screen Display Indication in Viewfinder ContdBasic System Basic System Connections and AdjustmentsStopper screw Attaching the Zoom Lens optionalAttaching the Viewfinder optional Sliding Securing ring Attaching the Microphone with KA-A50 Attaching the Microphone providedAttaching the Microphone optional Provided MicrophoneAttaching the Tripod Base provided Attaching the 4-inch Viewfinder OptionalTripod mounting holes How to Remove Lithium Batteries Inserting and Replacing Backup Lithium BatteriesLithium battery CR2032 How to Install the Lithium BatteryAC Operation Power SupplyBattery Pack Operation Flat shape type battery pack Anton-Bauer battery packAttaching a Flat Shape Type Battery Pack Battery Pack Operation ContdDetaching the Battery Pack Using AN ANTON-BAUER Battery PackAttaching and Detaching an Anton-Bauer Battery Pack Attaching the Battery PackBattery Pack Continuous Operating Time at 25 ˚C Remaining Battery Power DisplayPrecautions for the Battery Pack Operating Time with Battery PackTurning the Power on VTR switch setting GY-DV550 operation modePreparations REC INH VTR switch Switch on Back of VideocassetteCassette Loading and Unloading REC Save StbySetting the Date and Time Time display Counter switch TCDate display Counter switch UB Filter Camera SettingsScreen Size 43/169 aspect ratio Mode Selection Power onEyepiece Eyepiece focusing ring Viewfinder AdjustmentExternal Monitor Adjustment Brightness and contrast adjustmentAccu Focus can also be used in the above step Back Focus AdjustmentWhite Balance Adjustment White Balance AdjustmentColor video monitor Mixing Characters to Monitor OUTSwitch Settings of the VCR Section Reference input level is +4 dBs Audio Input Signal Selection Selecting the CH-1 channel input sound Selecting the CH-2 channel input soundFor each audio input Audio Input Level AdjustmentViewfinder Status 1 Mode Indicator level referenceControl Alarm MonitorMonitor Select switch Monitoring Audio during RecordingBasic Recording Operation Set the switches as requiredWHT-BAL a or B Set the Iris switch of the lens to a Shooting OperationBasic Recording Operation Contd About the Quick REC Start ModeVTR switch setting VCR Save ModeIf Unit is Left in Record-Pause Standby Mode Recording from the Save modeRET button Recording External Video Signals GENLOCK/AUXMemo About the status screen display of the viewfinder Recording with an External VCR Power switch VTR/RM multi-pin VTR Select switch ConnectorVTR Input switch Connecting VCR Connecting cable Model ConnectorAbout the external VCR alarm display VTR Select switch VTR switch Operate switchRecording with an External VCR Contd Eject button Playback ModePlayback Procedure To stop playback, press the Stop buttonFast-Forward, Rewind SearchREW button FF button Time Code Operation Presetting and Recording of Time Code Setting the time code related switches Setting the VCR Setup MenuAdvance Preset Presetting and Recording of Time Code Cont’dTime Code Presetting Procedure Presetting Users BIT DataExternal time code generator Set the related VCR Setup MenusREF Video signal Multi-Camcorder Master-Slave Connection Reproducing time codes Press the Play button Reproducing Time Codes Mark Mode Explanation of the S.S.F. FunctionMemory VTR trigger button How to Use the S.S.F. FunctionMark mode Number of memorized scenes Take buttonLOG button Stop button Resetting S.S.F. DataReset button Deleting S.S.F. DataAbout the Scene End Cue Up Function Precautions when writing S.S.F. dataWriting S.S.F. Data to Tape Outputting S.S.F. DataUsing External Components Connecting a Video Component with DV ConnectorFF FWD search is possible REW REV search is possible Video Connecting a PCMonitor Audio OUTVCR Setup Menu Group Name Setup MenuVCR Setup Menu VCR Setup Menu ConfigurationDisplaying and Setting VCR Setup Menus VCR Setup Menu ContdVCR Setup Menu Contents Setting Factory Group Value Contents Time CodeScreen Camera Menu Screen Flow Camera Menu Screen FlowScene File OFF Normal screen returns in the viewfinder How to Select from the Camera MenuItemSetting value Status button Shutter dialVF Display Screen Operation Screen Process Screen Advanced Process Screen Skin Color Adjust ScreenFile Manage Screen Storage OperationStatus button Setup Screen Time Date screen Resetting of Camera Menu Setting Values Reset OperationER dial Features of the Camera Section WHT.BAL selector switchFull-Time Auto White Balance FAW Iris Brightness Adjustment Adjustment of Lens IrisZebra Pattern Display During Manual Adjustment Basic operation Shooting the Screen Image on a Computer Monitor Variable Scan V.SCAN Band Video monitorGain Boost Under Lolux Condition Gain Sensitivity AdjustmentGain Switching Switch Position Factory-Set GainFull Auto Shooting FAS Function Switch Setup According to Illumination and SubjectSwitch Functions Automatic Setting ContentsProcess screen How to Use Skin Tone DetailSkin Color Adjust screen Shutter dial 1. Status buttonDisplay How to Use Skin Tone Detail Cont’d Using the Skin Tone Detail Function StatusSC Coarse SC Fine Phase Connecting the Local Remote Control Unit RM-LP55/RM-LP57Zoom Focus SC Coarse SC Fine Phase Gamma Title Title SET RM-LP57 Shutter EEI setting Gain ALC settingBack Tally lamp Connecting the camera remote control unitVTR/RM connector Headset Camera remote control unitRM-P200 Auto SET Nega RM-P300 Auto SET/BLACK Nega ABL Connecting the camera remote control unit Cont’dRemote control unit Light on Tally signals of camera Red Remote control unit Light on Call signals of camera RedServo TroubleshootingAlarm Indications OthersTroubleshooting Contd VTR Warning ServoBatt VTR Warning Hard VTR Warning HeadVTR Warning DEW VTR Warning StopAuto OFF AlarmAlarm Tone Display GY-DV550 Operation EarphoneTroubles with Error Code Outputs Error Code Error Details GY-DV550 Operation RemedyOpen the cassette cover by using Troubles Without Error Code Outputs Symptoms RemedyDoesnt work If so, set to Enable Hour Meter Display Specifications 140 External Dimensions unit mmGY-DV550DV Camcorder