![](/images/new-backgrounds/1140864/140864189x1.webp)
13. FEATURES OF THE CAMERA SECTION
13-8 Connecting the camera remote control unit (Cont’d)
Operation
■TALLY lamp display when the camera remote control unit is connected.
Set the POWER switch of the camera remote control unit to ON. About 30 seconds after turning the power on, the camera remote control unit will be operative.
Memo:
After the POWER switch is turned on, the camera remote control unit takes about 30 seconds to prepare for correct communication with this unit.
■Unavailable functions
The following functions are unavailable from the camera remote control unit.
•RM-P200 : AUTO SET NEGA
•RM-P300 : AUTO SET/BLACK NEGA
ABL
Memo:
•If the switch functions for this unit and the camera remote control unit are the same, the switch function of the camera remote control unit will have priority.
•The IRIS AUTO/MANUAL setting will be the camera remote control unit switch setting regardless of the lens section switch setting.
•When using the camera remote control unit with the local remote control unit
BACK TALLY lamp
LIGHT
ON | MODE |
OFF | RM |
VTR | |
COUNTER | INCOM |
CTL | MIC |
TC | CARBON |
UB | DYNAMIC |
INCOM
MIC LEVEL
ON
AUTO | FRONT |
MANUAL | REAR |
AUDIO SELECT | AUDIO INPUT |
OFF
CALL
RM OFF DC IN /BATT.
POWER
When the camera remote control unit is connected, the viewfinder (VF) FRONT TALLY lamp, REC/ALARM lamp inside the viewfinder and the BACK TALLY lamp are displayed as shown below.
| VF | BACK TALLY |
| |
|
|
|
| |
| TALLY | BLINK* | ON* | OFF* |
|
| |||
Preview signals of camera |
| Green | Green | Off |
remote control unit |
| light on | light on |
|
TALLY signals of camera | Red | Red | Red | Off |
remote control unit | light on | light on | light on |
|
CALL signals of camera | Red | Red | Red | Off |
remote control unit | light | light flashing | light flashing |
|
| flashing |
|
|
|
CALL signals of this unit |
| Red | Red | Off |
|
| light flashing | light flashing |
|
*The display method for the BACK TALLY lamp is set in VTR Setup menu No. 082 BACK TALLY MODE.
☞ See page 74
•Lamps are off for all other conditions.
95