![](/images/new-backgrounds/1140864/140864109x1.webp)
7. SHOOTING OPERATION
7-2 VCR Save Mode
OPERATE
VTR switch
NG OPERATE
ONOFF
When a recordable videocassette is loaded, the
●VTR switch setting
STBY : The
•In this condition, recording starts immediately when the VTR trigger button is pressed.
SAVE : The
The tape is protected.
The "SAVE" indicator appears in the viewfinder (in Status 1 mode).
The OPERATE indicator lights orange.
CAUTION:
VCR operation status display
STBY
or
SAVE
Viewfinder
ACCU - FOCUS
|
|
| G |
|
|
| F |
|
|
| I |
|
|
| SD |
|
|
| B |
| CH1 - - | - - - + - - |
|
F 5 . 6 | CH2 - - | - - - + - - | M : 09 9 |
STBY |
| < 6 0 | 1 2 . 4V |
(Status 1 mode)
•When the VCR Setup Menu item No. 396 SSF MODE is set to the CUE MODE or MARK mode, the VCR save mode is not entered.
•External VCR will not enter the SAVE mode.
Recording from the Save mode
●In the save mode, pressing the VTR trigger button will start recording.
However, in this case, it takes several seconds before the
●Pressing the VTR trigger button again interrupts the recording and the
7-3 If Unit is Left in Record-Pause (Standby) Mode
When the
To start recording from the tape protect mode, press the VTR trigger button; the drum starts to rotate and recording starts in about 3 seconds.
To return to the
•The time until the unit enters the tape protect mode after it is placed in
LONG PAUSE TIME.
When used in a cold environment, the setting will be 3 minutes regardless of the setting on the VCR Setup Menu.
☞ See page 75.
55