3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS
3-2 Attaching the Zoom Lens (optional)
1. Loosen the mount ring.
2. Connect the cable connector.
3. Attach the lens with its pin aligned with the hole in the mount.
1 
4.
3.
2.
Hole Pin
Mount ring
When unplugging the cable connector, first remove the lens itself. Then grasp this portion and pull straight out.
4. Tighten the mount ring.
CAUTION:
Be sure to tighten the mount ring completely. Incomplete tightening may result in the lens dropping off or disturbed back focus.
3-3 Attaching the Viewfinder (optional)
Sliding | 1 |
|
securing ring 5 | Mounting guide |
4 
Stopper 
screw 
Viewfinder
mount base
2
Connector
1. Loosen the stopper screw on the viewfinder.
2. Connect the connector.
3. Align the mounting guide with the camera’s viewfinder mount base and attach the viewfinder.
4. Tighten the stopper screw.
5. Tighten the sliding securing ring.
* To detach the viewfinder, reverse the mounting procedure.
33