Audio Output
ŸAudio Output: Set to "ON" when delivering audio to a speaker connected to the camera,
ŸAudio Output Level: Select among High, Mid and Low
Figure 4-29 Audio Output
Note: Audio Input/Output can have some noise and delay.
Please click the “Save” button to save your settings. You can also
Note click the left button “Reset to Default”to set all the data and options as defaults.
Network Settings
Basic
Basic
Figure 4-30 Network basic
Network
ŸIP Address: Input your IP address here when you select “Manual”.
ŸSubnet Mask: Please use default number: 255.255.255.0. If the subnet mask is not properly configured, the camera may not be able to communicate with other devices on the network.
ŸDefault Gateway: leave it blank as default setting. It is unnecessary to enter Default Gateway if it is not used. Ask your Network Administrator for Default Gateway information.
ŸPrimary DNS: (same as above)
ŸSecondary DNS: (same as above)
Live Stream
ŸProtocol: This is used by Live View.
Users can select TCP or Http protocol.
32
