Installation and Connections, Before You Begin | JVC VN-T16/U

3 Installation and Connections

This chapter describes the installation and connection of the Box Camera.

Before You Begin

Please read this INSTRUCTIONS carefully before you install and operate the camera.

Unpack Everything

ŸHD IP Camera

ŸWARRANTY CARD

ŸSAFETY PRECAUTIONS

ŸQUICK GUIDE

Ÿ8-PIN TERMINAL BLOCK for alarm input/output

ŸCD-ROMcontaining INSTRUCTIONS and IP Finder software

Equipment Required

The following tools might help you to complete the installation:

ŸDrill

ŸScrewdrivers

ŸWire cutters

Camera Installation

	Note	All the installation and operations here should conform to your
	Note	local electricity safety rules.
		local electricity safety rules.

Checking Unpacked Camera

When you receive the camera from the shipping agency, please check whether there is any visible damage to its appearance. The protective materials used for the package of the camera can protect most accidental clashes during transportation. Then you can open the box to check the accessories.

7

Image 8

JVC VN-T16/U Installation and Connections, Before You Begin, Unpack Everything, Equipment Required, Camera Installation

Contents

HD IP Camera Instructions Contents Contents of this manual Europe FCC Compliance StatementManufacturer’s Declaration of Conformance Overview of Contents About This Document Camera Overview Camera Parts and Definitions Product OverviewCamera Parts and Definitions GND Installation and Connections Camera InstallationBefore You Begin Unpack Everything Connection type1 Network Camera DiagramMounting Connecting the Camera to a Personal Computer Setting IPConnecting the Camera to a Personal Computer Hardware and Software Requirements ∙ On tool menu, click Internet Option Page ∙ Click Tools è Internet Options è Security è Custom level Page Page Image Parameters Overview of Navigation and ControlsLive View Automatic Exposure BasicImage Color Day-Night Settings Brightness adjustmentLevel Contrast Shutter Speed AWB Gain, B Gain & D Gain Noise ReductionSharpness Backlight CompensationBLC Compression PicturePicture Flip Picture Mirror User interface of Encoder No.1 is as follows GOP User interface of Encoder No.2 is as follows Rate control Mask Zone Alarm External Digital Input Motion Detection Settings Alarm Output Confined SD recording priority alarm motion network loss SD Recording Mail Notification Conditions Mail to Email Server SettingsAuthentication Settings Audio Audio Input Network Settings Audio OutputBasic Network FTP Server Port Authentication Multicast Address Admin Function AdministratorHttps User List Set Display and Synchronization Mode Date/TimeSet Date and Time Manually Set Date and Time by NTP Server Update Daylight Configuration Event Log Information Miscellaneous 51 Miscellaneous Specifications Operational Specifications JVC Kenwood Corporation