Daylight
Figure 4-42 Daylight
Daylight Saving
Select “ON” to activate the
Please click the “Save” button to save your settings. You can also
Note click the left button “Reset to Default” to set all the data and options as defaults.
Update
You can update system firmware if the update file is available. It is the customer's responsibility to update firmware. All camera motions will shut down during firmware update. Close any other screens before starting a firmware update. Never disconnect power and LAN cable during the firmware update process. Rebooting the camera after firmware update may take approx. 15 minutes. After you finish FW update, please reboot your computer first time. Be careful, power can’t be shut down when you’re updating firmware. Otherwise, it will cause FW update failure and you have to call back to maintenance.
Figure 4-43 Firmware Update
37
