Hardware and Software Requirements

Computer

Windows XP or Windows 7 as OS

Internet Explorer Version 6.0-8.0

CPU: Intel Pentium IV X2 2.4 GHz or equivalent AMD

Memory: 1G or above

Display adapter

Support DirectX9 for example

NVIDIA GeForce 6 Series above

ATI Mobility Radeon 9500 above.

Power Supply

This camera requires a DC12V / AC24V / PoE power supply. Please make sure you use the correct power supply before connecting to the camera.

Network Connector

Please use the RJ45 network connector for connecting the camera to your computer or switch.

Switch

If you want to monitor several cameras, the switch is required.

To avoid damage to the camera, never connect more than one type of power supply (PoE IEEE802.3 Ethernet Class 0 Caution or DC12V or AC24V power plug) at the same time. If using PoE, this camera is to be connected only to PoE networks

without routing to external equipments.

Connecting the Camera to a Personal Computer

Setting IP

This is a network-based camera and must be assigned an IP address first. The camera’s default IP address is 192.168.0.2 and sub mask is 255.255.255.0. To change IP address, open Network Settings page described later.

If your network uses a DHCP server, an IP address can be assigned automatically from the DHCP server by enabling DHCP in the Network Settings page described later.

Connecting the Camera to a Personal Computer

1.Connect the network cable to the camera and then turn on the camera’s power.

9

Page 10
Image 10
JVC VN-T16/U manual Connecting the Camera to a Personal Computer, Hardware and Software Requirements, Setting IP