Configuring your Camera

Setting Battery Save

 

You can set separate battery save times for the camera and the Image LCD.

Camera

To conserve battery power, your camera goes into a low-power mode if not

 

used for a specified amount of time.

 

1. Choose Battery Save from the Tools menu, choose Camera, then

 

highlight the desired time-out.

 

2. Press the OK button.

 

NOTE: When the Camera Battery Save time elapses, both the Image LCD

 

and the Top Status LCD turn off. To exit the Battery Save state, turn

 

the D-Dial to OFF, then turn it to Single Frame shooting.

 

Alternatively, lightly press the Shutter Release button.

 

NOTE: If the camera has an IEEE 1384 connection to a computer that is

 

turned on, the camera never enters the Battery Save state. As long

 

as the IEEE 1394 connection remains, the camera stays "awake",

 

checking to see if the DCS Camera Manager software is running on

 

the computer.

Image LCD

1.Choose Battery Save from the Tools menu, choose Display, then highlight the desired time-out.

2.Press the OK button.

The Image LCD turns off when the Display Battery Save time elapses.

5-2

April 28, 2004

Page 70
Image 70
Kodak 6B8773 manual Setting Battery Save, Camera