Kodak 6B8773 manual Lens Optimization, Overview

Configuring your Camera

Lens Optimization

Overview	Some lenses produce a color shift in the corners of images. Your camera
	has a feature that corrects this color shift to create a more uniform image.
	There are three methods for controlling the strength of this correction.
	Method one: Auto—(see page 5-32) This method automatically
	determines the correction strength for each image based on analysis of the
	image data. This feature works with most lenses and may be the only
	method you ever need to use. When the camera is in Auto, all of the work is
	done for you.
	NOTE: The Auto method is recommended if your images are not showing
	anomalies.
	Method two: Manual—(see page 5-33) This method allows you to
	directly input the correction strength. This method is provided for testing,
	and is not for daily use.
	Method three: Lens Selection—(seepage 5-33) This method
	determines the correction strength by selecting the specific lens you are
	using. Since the camera cannot uniquely identify every lens attached, you
	must select the lens from a list. Your camera contains a master list of
	commonly used, current model lenses from several manufacturers. You
	can easily add additional lenses to the master list. There is a conveniently
	accessible user list for the lenses you use most often. The camera can
	usually automatically identify and select the current lens if it is in the user
	list. It is easy to maintain this list by adding and removing lenses.
	The master list includes default correction strengths for each lens.
	Sometimes these defaults are not ideal. You can adjust the strength for any
	lens in the master list. If you define new lenses (see page 5-39), you will
	need to set the strengths for them as well.
	We recommend that you try the Auto method first and only use the Lens
	Selection method if you are not satisfied with the results of the automatic
	optimization.

April 28, 2004 5-31