Kodak 6B8773 manual April 28

Controlling Exposure

Loading Settings from a Card

Deleting Settings

Using the DCS Photo Desk software, you can save settings to the root directory of a card. (These filenames have .WB extension.)

IMPORTANT: Settings must be saved to the root directory or you will not be able to load them into your camera.

You can then put the card in your camera and load the settings into camera memory. A maximum of 10 settings can be stored in camera memory.

1.Choose Load from Card from the Saved Settings menu, choose a card (if two are inserted), then highlight a setting.

2.Press the OK button to load the setting.

To make room in camera memory for new settings, you can delete settings that you no longer use.

1.Choose Delete Settings from the Saved Settings menu, then highlight a setting.

2.Press the OK button to delete the setting and close the confirmation screen.

7-6 April 28, 2004