Camera Care

CAUTION:

Inspecting and Cleaning the The imager is very delicate. It is important that you follow

Imagerthese instructions when inspecting and cleaning the imager. Failure to do so can damage your camera.

1.Turn off the camera.

2.Remove the lens from the camera.

3.Power on your camera using a fully charged battery.

CAUTION:

If the battery loses charge or the camera power is turned off during the cleaning procedure, the shutter can close and damage your camera.

4.Put the camera in Manual Exposure mode (M). See page 7-13.

5.Choose Imager Clean from the Tools menu, then choose Open.

6.Press the OK button.

The mirror raises and the shutter opens.

7.Inspect the imager according to the TIB procedure at www.kodak.com/go/dcs.

8.Choose Imager Clean from the Tools menu then choose Close.

9.Press the OK button.

The shutter closes and the mirror returns.

10.Turn off the camera.

11.Replace the lens.

14-4

April 28, 2004

Page 192
Image 192
Kodak 6B8773 manual April 28