Kodak 6B8773 manual Serial In Mode

Serial Data Collection and Global Positioning System

Serial In Mode	Using Serial In mode, your camera accepts text strings from a connected
	external device. The information is then added to specified image headers.
	Serial In and Serial Out modes can work simultaneously.
	NOTE: The Scan-Shoot and Scan-Shoot Multi features allow connectivity

of serial bar code scanners. To enable, contact your dealer of Kodak products.

1. Choose Serial Port from the Tools menu then choose Serial In.

2. Select a Serial In option, described below.

Menu	Action	Comments
Choice
None	No data transmitted.	Serial port is unavailable.
GPS	A text string from the	If a TRIMBLE GPS card is
	connected GPS device is	inserted in the camera, the
	written to the header of the	TRIMBLE card overrides the
	just-captured image.	serial port GPS functionality.
New	The text string from the	Text string must be 250 valid
	connected device is written	characters, or less. Valid
	to the header of subsequent	characters consist of ASCII
	images.	characters, carriage return,
		and line termination.
Previous	A text string from the	When you select New Images
	connected device is written	or Previous Image, a Serial In
	to the header of previously	Status option becomes
	captured images.	available.
Scan-Shoot	A scanned bar code value is	File type must be RAW. Select
	written to the image header.	Scan-Shoot, scan a bar code,
		then capture an image.
Scan-Shoot	Up to eight scanned bar	File type must be RAW. Select
Multi	code values are written to	Scan-Shoot Multi, scan up to
	the image header.	eight bar codes, then capture
		an image.
Status	This option appears when	See page 15-3.
	you select New or Previous.

15-2 April 28, 2004