Kodak 6B8773 manual April 28

Configuring your Camera

Assigning Optimum Strengths to Lenses in the User List

Once you determine the optimum strengths for a lens in Photo Desk (see page 5-44) and add the lens to the user list, you can assign the strengths to the lens in the user list.

If you remove the lens from the user list (see page 5-37), the new values are moved to the master list. You can always reset to the default strengths, if needed (see page 5-46). If you delete the lens (see page 5-41), the changes are not saved in the master list.

1.With the appropriate lens mounted and set to infinity, choose Lens Optimization from the Capture menu, then highlight the lens in the user list.

2.Press the right side of the Five-way control to display the Strength screen.

3.Select the focal length and aperture.

4.Press the right side of the Five-way control to display boxes where you can enter the strength determined in Photo Desk.

5.Press the right or left side of the Five-way control to highlight a box. Press the top or bottom of the Five-way control to change a value.

NOTE: The strength must be between zero and 99.

6.Press the OK button.

The assigned strength is applied whenever you capture an image with the lens selected in the user list.

April 28, 2004 5-45